Product groups
Lifting bolts with retaining ring
K0585

Lifting bolts with retaining ring

go back

Item description/product images

Lifting bolts with retaining ring
  • Lifting bolts with retaining ring
  • Lifting bolts with retaining ring
  • Lifting bolts with retaining ring
DescriptionMaterial:Bolts, ring nut and safety ring:
Ø 12, 16 and 20 = 16MnCrS5 1.7139
Ø 25 and 32 = 42CrMoS4 1.7227
strip spring: CK75 1.1248
Version:Black oxide finish.Note:The lifting bolts are used for safely hoisting loads with the aid of end flanges similar to VDI 3366. The hole for receiving dimension D must have a tolerance of +1mm.

The retaining ring is held into position by a spring band – the lifting bolt can only be released by manual compression of the retaining ring.

With CE marking.

Detailed operating instructions are included.
DownloadHere is all the information as a PDF datasheet:
 Datasheet K0585 Lifting bolts with retaining ring 283 kB

Drawings

Lifting bolts with retaining ring

Item selection/filter

Item No.DD1

LL1L2Hmax. load in kgCADAcc.PriceOrder
K0585.1205512155569101,4300 on request
K0585.1607216207289131,8600 on request
K0585.20090202590113162,3900 on request
K0585.251152532115143203,22.000 on request
K0585.321453240145180253,73200 on request
Search
My CADACCOUNTE-mailPassword
United States
Sitemap Print Recommended Newsletter Top
Copyright © 2017 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · information@kipp.com · General Terms and Conditions