Indexing Plungers pull knob, short Version, Style D, metric

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers pull knob, short version
      - Indexing Plungers pull knob, short Version, Style D, metric

Item description/product images

DescriptionMaterial:Steel version:
Indexing pin hardened:
grade 5.8

Stainless steel version:
Indexing pin not hardened
Threaded sleeve 1.4305
Indexing pin 1.4305

Mushroom knob black grey thermoplastic.Version:Steel version:
Indexing pin hardened, ground, black oxidised.

Stainless steel version:
Indexing pin not hardened, ground, bright.Note:Indexing plungers are used to prevent any change in position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.On request:Special versions.

Drawings

Overview of items (compressed)

Item selection/filter

Order No. steel hardened	Order No. stainless steel not hardened	Form	D	D1	D2	L	L1	L2	H	SW1	SW2	F x 30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
K0631.8903	K0631.18903	D	3	M6x0,75	14	25,5	6	5	3,5	8	10	0,8	4	10
K0631.8004	K0631.18004	D	4	M8x1	18	29,5	6	6	4	10	13	1	4	12
K0631.8105	K0631.18105	D	5	M10x1	21	34,5	8	7	5	13	17	1,3	5	12
K0631.8206	K0631.18206	D	6	M12x1,5	25	41,7	10	8	6	14	19	1,8	6	14
K0631.8308	K0631.18308	D	8	M16x1,5	33	54	12	10	8	19	24	2,3	14	28
K0631.8410	K0631.18410	D	10	M20x1,5	33	61	15	12	10	22	30	2,8	15	32