Indexing Plungers, all stainless steel, Style G, inch

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers without collar, stainless steel
      - Indexing Plungers, all stainless steel, Style G, inch

Item description/product images

DescriptionMaterial:Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.

Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.

Mushroom knob 1.4305, electrolytic-polish.Version:Bright.
Indexing pin ground.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot.On request:Special versions.Special features:

Drawings

Item selection/filter

Order No. Stainless steel hardened	Order No. Stainless steel not hardened	Form	D	D1	D2	L	L1	L2	H	F x 30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Order No. screw-in washer
K0634.001903AJ	K0634.111903AJ	G	3	1/4-28	14	34,5	17	14	3,5	0,8	4,5	10	K0344.99
K0634.001004AK	K0634.111004AK	G	4	5/16-24	18	43	21	18	4	1	6	12	K0344.90
K0634.001105AL	K0634.111105AL	G	5	3/8-24	21	50	24	21	5	1,3	5	12	K0344.91
K0634.001206A5	K0634.111206A5	G	6	1/2-13	25	59	28	25	6	1,8	6	14	K0344.92
K0634.001308A6	K0634.111308A6	G	8	5/8-11	33	77	36	33	8	2,3	15	35	K0344.93
K0634.001410A7	K0634.111410A7	G	10	3/4-10	33	83	40	33	10	2,6	15	34	K0344.94
K0634.001412AO	K0634.111412AO	G	12	3/4-16	33	87	42	33	12	2,8	15	39	K0344.94
K0634.001516A8	K0634.111516A8	G	16	1-8	40	106	50	40	16	3,2	20	46	K0344.95