DescriptionProduct description:Clamped using compressed air. If the pressure fails, tension is retained by a spring. A spring force of 6 N must be overcome to release the positioning adapters using compressed air. Material:Body, stainless steel. Seal, NBR.Version:Stainless steel bright.Note for ordering:M3x28 cap screws for fastening from below are supplied. M4 cap screws for fasteing from above are not supplied.Note:Installation dimensions are for a 6 mm thick plate. The specified clamping forces (F) and holding forces are based on an operating pressure of 0.5 Mpa. Repeat accuracy ±0.2 mm.Accessory:Clamping pins K1564.Drawing reference:
1) "Clamping" connection 2) "Release" connection 3) M3 cap screw 4) M4 cap screw 5) Clamping pin 6) Locating fixture