- NEW Product Innovations
- K1875
Hand wheels, steel, stamped
- K1876
Handwheels sheet stainless steel
- K2010
Snap locks, plastic with recessed grip, snap-in
- K2011
Snap locks, plastic with recessed grip, snap-in
- K0274
Wing grips “Miniwing”
- K0658
Wing grips “Miniwing”
tapped through
- K1640
Pull handles stainless steel, oval with thru hole
- K2068
Clamping bolt flexible
- K2069
Clamping screw with clamping ring for flexible clamping bolt
- K2070
Clamping ring for flexible clamping bolt
- K2071
Extensions for flexible clamping bolt
- K2072
Slot straps for flexible clamping bolt
- K2099
DIN 433 washer, steel or stainless steel
- K2088
Steel telescopic slides
for side mounting, full extension, load capacity up to 68 kg
- K2089
Steel telescopic slides
for side mounting, partial extension, load capacity up to 68 kg
- K2090
Steel telescopic slides
for side mounting, full extension, load capacity up to 68 kg
- K2091
Steel telescopic slides
for side mounting, over-extension, load capacity up to 68 kg
- K2092
Stainless steel telescopic slides
for side mounting, over-extension, load capacity up to 90 kg
- K2093
Mounting bracket, steel,
for telescopic slides
- K2094
Mounting bracket, steel,
for telescopic slides
- K2095
Mounting bracket, steel,
for telescopic slides
- K2096
Mounting bracket, stainless steel,
for telescopic slides
- K2097
Grip with locking unit, steel
- K0747
Indexing plungers ECO
- K1367
Edge protection profiles with steel retaining strip
- K1368
Edge protection sealing profiles with integrated steel wire core
- K1696
Flat clamps
with cam
- K1697
Side clamp
- K1964
Hinges stainless steel, separable,
dismountable
- K2056
Bearing flange
for feed roller
- K2057
Aluminium profiles D50
Type I, tube
- K2058
Face pin spanner
adjustable, cranked
- K2059
Slotted round nuts, steel,
DIN 70852
- K2060
Slotted round nuts, steel or stainless steel,
DIN 981
- K2061
Locking plate steel DIN 70952
- K2062
Locking plate steel DIN 462
- K2063
Locking plate steel or stainless steel
DIN 5406
- K2064
Rigid couplings
one-piece
- K2065
Rigid couplings
two-piece
- K1849
Tubular handles, aluminium or stainless steel
- K1872
Clamping levers ECO, plastic
with female thread
- K1872
Clamping levers ECO, plastic
with male thread
- K1743
Clamping levers ECO, plastic
with female thread, threaded insert stainless steel
- K1743
Clamping levers ECO, plastic
with male thread, threaded insert stainless steel
- K1553
Clamping levers, plastic
with female thread and safety function
- K1553
Clamping levers, plastic
with male thread and safety function
- K1873
Clamping levers, plastic
with female thread and safety function, thread insert stainless steel
- K1873
Clamping levers, plastic
with male thread and safety function, thread insert stainless steel
- K0190
Pull handles biopolymer
- K1060
Pull handles biopolymer
- K0251
Mushroom knobs biopolymer
internal thread
- K0251
Mushroom knobs biopolymer
external thread
- K0247
Knurled knobs biopolymer
- K0154
Star grips biopolymer, similar to DIN 6336
- K0274
Wing grips "Miniwing" biopolymer
- K1963
Hinges plastic, separable,
dismountable
- K1634
Pull handles aluminium, oval, slanted
- K1795
Recessed handle, aluminium, fold-down
- K2018
Telescopic slides, steel
Double-T form, full extension, load capacity up to 305 kg
- K2019
Telescopic slides, steel
double arrangement, full extension, load capacity up to 133 kg
- K2020
Telescopic slides, steel
partial extension, load capacity up to 741 kg
- K2021
Telescopic slides, steel
S-form, full extension, load capacity up to 459 kg
- K2022
Linear ball bearing
with internal race, steel, load capacity up to 3,959 kg
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K2051
Rubber buffers, steel
type KRA spherical with male thread
- K0576
Rubber buffers type KE spherical with female thread
- K2052
Grub screws with hex socket and pin
DIN EN ISO 4028
- K2067
Toggle clamps, steel, black, horizontal with horizontal foot and adjustable clamping spindle
- K2066
Toggle clamps, steel, black, vertical with horizontal foot and adjustable clamping spindle
- K1640
Pull handles stainless steel, oval
- K1811
Star grips, plastic with safety function
- K0154
Star grips with safety cable
similar to DIN 6336, metal parts stainless steel
- K0154
Star grips
similar to DIN 6336, metal parts stainless steel
- K2013
Dowel pins ISO 2338
- K2014
Linchpins DIN 11023
- K1966
Round aluminium tubes
with slots
- K1967
Rotation locks
plastic for tube clamps
- K2044
Hoist screws VDI 3366
- K2045
Hoist pins VDI 3366
- K2054
Swing clamps, heavy duty
- K2053
Swing clamps, heavy duty
extended clamping travel
- K2049
Cam clamps, steel with tension lever
- K2048
Cam clamps steel
- K2050
Clamping plates stainless steel
for cam clamp
- K2030
Cover caps plastic
for hex bolts and nuts
- K2032
Plugs with tapped hole, plastic
for round tubes
- K2031
Plugs with tapped hole, plastic
for square tubes
- K2035
Adjustment plugs, plastic with felt glide surface
for round and square tubes
- K2034
Adjustment plugs, plastic with non-slip inserts
for round and square tubes
- K2033
Adjustment plugs, plastic without inserts
for round and square tubes
- K2028
Protective caps, plastic
for round tubes
- K2029
Protective caps, plastic
for square tubes
- K2036
Plugs, plastic with felt glide surface
for round and square tubes
- K0494
Tube end plugs, plastic
for round and square tubes
- K2037
Beam couplings aluminium
with clamping hubs
- K2038
Beam couplings stainless steel
with clamping hubs
- K2039
Beam couplings aluminium
with detachable clamp hubs
- K2040
Beam couplings stainless steel
with detachable clamp hubs
- K1178
Spring hinges
aluminium profile, 0.2 Nm
- K1665
Spring hinges
aluminium profile, 0.50 Nm
- K1666
Spring hinges
aluminium profile, 0.7 Nm, long version
- K1667
Spring hinges
aluminium profile, 0.9 Nm, long version
- K1179
Spring hinges
aluminium profile, 0.35 Nm
- K1182
Spring hinges
aluminium profile, 3.8 Nm
- K1518
Hinges, stainless steel
with preset friction
- K1517
Hinges, stainless steel
- K1850
Snap locks stainless steel
with grip, fold-down
- K1851
Snap locks stainless steel
with Bowden cable connection and grip, fold-down
- K1670
Cam-action indexing plungers
- K1671
Cam-action indexing plungers stainless steel
- K1672
Cam-action indexing plungers
- K1673
Cam-action indexing plungers stainless steel
- K1674
Cam-action indexing plungers with stop
- K1675
Cam-action indexing plungers with stop, stainless steel
- K1679
Cam-action indexing plunger,
with hexagon
- K1680
Cam-action indexing plunger, stainless steel, with hexagon
- K0123
Clamping lever, die-cast zinc with extended collar
with male thread, steel parts stainless steel
- K0124
Clamping lever, stainless steel with extended collar
with male thread, steel parts stainless steel
- K1701
Clamping lever, plastic with extended collar
with male thread, steel parts stainless steel
- K1877
Pull handles, plastic with soft grip
- K1968
Washers DIN 7349 for bolts used for heavy-duty applications
- K1897
Hinges die-cast zinc
- K1898
Hinges die-cast zinc
adjustable
- K1899
Hinges die-cast zinc
with fastening screws
- K1900
Hinges stainless steel
adjustable
- K2015
Slot key profile connectors
Type I
- K2016
Slot key direct connectors
Type I
- K2017
Angle steel
- K2012
Rubber-metal overhead element
- K1965
Centring clamp, steel, round
- K1641
Pull handles, aluminium
- K1839
Positioning bushes, steel or stainless steel with status sensor
- K1840
Positioning bushes, steel or stainless steel for status sensor
- K1841
Locating bushes, stainless steel with status sensor
- K1842
Locating bushes, stainless steel for status sensor
- K1843
Locating bushes, stainless steel with status sensor, for ball lock pins with twist knob
- K1844
Locating bushes, stainless steel for status sensor, for ball lock pins with twist knob
- K0338
Indexing Plungers
pull knob
- K0632
Indexing Plungers pull knob, stainless steel
- K0250
Mushroom Knobs stainless steel
- K0665
Spacer rings stainless steel
- K0700
Hexagon nuts thin DIN 439 / ISO 4035
- K1854
Support elements, hydraulic, screw-on
single-acting with spring return
- K1855
Side clamps, hydraulic
single-acting with spring return
- K1856
Rotary lever clamps, hydraulic
double / single-acting with spring return
- K1857
Tension levers for rotary lever clamps
- K1858
Link clamp, hydraulic
double-acting
- K1859
Block cylinder, hydraulic with metal wiper
double / single acting with spring return
- K1860
Screw-in hydraulic cylinder
double-acting
- K1861
Screw-in hydraulic cylinder
single-acting with spring return
- K1862
Swing clamps, hydraulic, compact
double / single-acting with spring return
- K1863
Clamping arm
for compact hydraulic swing clamps
- K1864
Swing clamps, hydraulic
double / single-acting with spring return
- K1865
Clamping arm
for hydraulic swing clamps
- K1870
Rotary lever clamps, pneumatic
double-acting
- K0851
Hook clamp holders
- K0705
Shoulder screws
similar to ISO 7379
- K1969
Replacement screw for cam screws
- K1970
Replacement screw for mandrel collets
- Couplings
- K1908
Cylindrical pins
DIN 6325
- K1909
Cylindrical pins with internal thread
DIN EN ISO 8735
- K1948
Clamp straps
tapped-heel
- K1949
Clamp straps
with flattened ball
- K1950
Clamp straps gooseneck
narrow, steel
- K1951
Clamp straps gooseneck
DIN 6316 wide, steel or aluminium
- K1952
Clamp straps open U
DIN 6315, steel or aluminium
- K1953
Clamp straps open U
flat pin, steel or aluminium
- K1954
Clamp straps pivot
strap only or assembly
- K1955
Clamp straps mini
double sided
- K1956
Clamp straps pivot
steel
- K1957
Talon grips round
- K1958
Talon grips
- K1910
Studs
- K1911
Nuts for T-slots
long
- K1912
Slot key profile
type I
- K1913
Ball-end thrust screws without head
short version
- K1914
Gripper pads round
carbide
- K1915
Gripper pads square
carbide
- K1916
Thrust pads
with retaining pin
- K1938
Circlips for shafts
DIN 471
- K1939
Circlips for bores
DIN 472
- K1940
Circlips E-type
DIN 6799
- K1917
Slotted round nuts
DIN 1804
- K1918
Slotted nuts
with elastic lock
- K1960
Threaded rods
steel and stainless steel DIN 976-1
- K1919
Lifting pins
self-locking, stainless steel
- K1920
Lifting pins
self-locking
- K1921
Locating bushes
for ball lifting pins stainless steel, flat
- K1922
Receiver bushes
for ball lifting pins, stainless steel
- K1923
Shaft collars one-piece,
wide, slitted outside
- K1924
Shaft collars one-piece,
wide, slitted inside
- K1925
Shaft collars two-piece
wide
- K1905
Position indicator
quasi-absolute, mains-independent, indicator accuracy 10 µm, small design
- K1906
Position indicator
quasi-absolute, mains-independent, indicator accuracy 10 µm
- K1959
Magnetic sensors
passive sensors, miniature design
- K1926
Hollow shaft sensors
with magnetic scanning
- K1927
Reducer sleeves
- K1928
Adjusting knobs with position indicator
digital display
- K1929
Position indicators for handwheels
analogue-digital display
- K1930
Handwheels for position indicators
- K1931
Rubber impact buffers
type TP door buffer
- K1932
Rubber-metal impact buffer rails
- K1933
O-shaped mounts
- K1907
Neoprene connecting isolators, two-piece
- K1934
Clevis joints for rod ends
- K1935
Clevis joints for rod ends
stainless steel
- K1936
Axial joints for tractive forces
adjustable
- K1937
Ducks feet
- K0787
Hook wrench with lug
DIN 1810A enhanced
- K1520
Disc handwheels, aluminium without grip
- K1521
Disc handwheels, aluminium with revolving cylindrical grip
- K1522
Disc handwheels, aluminium with fold-down cylindrical grip
- K1523
2-spoke handwheels, aluminium without grip
- K1524
2-spoke handwheels, aluminium with revolving cylinder grip
- K1525
2-spoke handwheels, aluminium with fold-down cylinder grip
- K1347
Strap hinges,
steel or stainless steel
- K1852
Hinges, stainless steel
- K1853
Hinges, stainless steel
with fastening screws
- K0266
Crank Handles with fold-away grip
- K0268
Crank handles with safety grip
- K0659
Crank Handles with revolving grip
- K0996
Crank handles aluminium with revolving grip
- K0997
Crank handles aluminium with fold-away grip
- K0998
Crank handles aluminium with safety grip
- K1794
Palm grips, plastic with protruding steel bush
- Newsletters
- Product Overview
- Press Releases
|
|
|
K1938Circlips for shafts DIN 471 |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Spring steel or 1.4122 stainless steel.Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:Special features: |
| Order No. | Main
material | A | B | D1 | D2 | D3 | D4 | D5 | H | M | CAD | Acc. | Price | Order |
|---|
| K1938.030400 | steel | 1,9 | 0,8 | 3 | 2,8 | 2,7 | 7 | 1 | 0,4 | 0,5 |  | | 0.23 $ (USD) | | | K1938.040400 | steel | 2,2 | 0,9 | 4 | 3,8 | 3,7 | 8,6 | 1 | 0,4 | 0,5 | | | 0.23 $ (USD) | | | K1938.050600 | steel | 2,5 | 1,1 | 5 | 4,8 | 4,7 | 10,3 | 1 | 0,6 | 0,7 | | | 0.23 $ (USD) | | | K1938.060700 | steel | 2,7 | 1,3 | 6 | 5,7 | 5,6 | 11,7 | 1,2 | 0,7 | 0,8 | | | 0.23 $ (USD) | | | K1938.070800 | steel | 3,1 | 1,4 | 7 | 6,7 | 6,5 | 13,5 | 1,2 | 0,8 | 0,9 | | | 0.23 $ (USD) | | | K1938.080800 | steel | 3,2 | 1,5 | 8 | 7,6 | 7,4 | 14,7 | 1,2 | 0,8 | 0,9 | | | 0.23 $ (USD) | | | K1938.091000 | steel | 3,3 | 1,7 | 9 | 8,6 | 8,4 | 16 | 1,2 | 1 | 1,1 | | | 0.26 $ (USD) | | | K1938.101000 | steel | 3,3 | 1,8 | 10 | 9,6 | 9,3 | 17 | 1,5 | 1 | 1,1 | | | 0.26 $ (USD) | | | K1938.121000 | steel | 3,3 | 1,8 | 12 | 11,5 | 11 | 19 | 1,7 | 1 | 1,1 | | | 0.26 $ (USD) | | | K1938.141000 | steel | 3,5 | 2,1 | 14 | 13,4 | 12,9 | 21,4 | 1,7 | 1 | 1,1 | | | 0.35 $ (USD) | | | K1938.151000 | steel | 3,6 | 2,2 | 15 | 14,3 | 13,8 | 22,6 | 1,7 | 1 | 1,1 | | | 0.37 $ (USD) | | | K1938.161000 | steel | 3,7 | 2,2 | 16 | 15,2 | 14,7 | 23,8 | 1,7 | 1 | 1,1 | | | 0.37 $ (USD) | | | K1938.171000 | steel | 3,8 | 2,3 | 17 | 16,2 | 15,7 | 25 | 1,7 | 1 | 1,1 | | | 0.49 $ (USD) | | | K1938.181200 | steel | 3,9 | 2,4 | 18 | 17 | 16,5 | 26,2 | 2 | 1,2 | 1,3 | | | 0.60 $ (USD) | | | K1938.191200 | steel | 3,9 | 2,5 | 19 | 18 | 17,5 | 27,2 | 2 | 1,2 | 1,3 | | | 0.67 $ (USD) | | | K1938.201200 | steel | 4 | 2,6 | 20 | 19 | 18,5 | 28,4 | 2 | 1,2 | 1,3 | | | 0.65 $ (USD) | | | K1938.221200 | steel | 4,2 | 2,8 | 22 | 21 | 20,5 | 30,8 | 2 | 1,2 | 1,3 | | | 0.77 $ (USD) | | | K1938.241200 | steel | 4,4 | 3 | 24 | 22,9 | 22,2 | 33,2 | 2 | 1,2 | 1,3 | | | 0.91 $ (USD) | | | K1938.251200 | steel | 4,4 | 3 | 25 | 23,9 | 23,2 | 34,2 | 2 | 1,2 | 1,3 | | | 0.88 $ (USD) | | | K1938.261200 | steel | 4,5 | 3,1 | 26 | 24,9 | 24,2 | 35,5 | 2 | 1,2 | 1,3 | | | 1.05 $ (USD) | | | K1938.281500 | steel | 4,7 | 3,2 | 28 | 26,6 | 25,9 | 37,9 | 2 | 1,5 | 1,6 | | | 1.45 $ (USD) | | | K1938.301500 | steel | 5 | 3,5 | 30 | 28,6 | 27,9 | 40,5 | 2 | 1,5 | 1,6 | | | 1.42 $ (USD) | | | K1938.321500 | steel | 5,2 | 3,6 | 32 | 30,3 | 29,6 | 43 | 2,5 | 1,5 | 1,6 | | | 1.82 $ (USD) | | | K1938.351500 | steel | 5,6 | 3,9 | 35 | 33 | 32,2 | 46,8 | 2,5 | 1,5 | 1,6 | | | 1.87 $ (USD) | | | K1938.381750 | steel | 5,8 | 4,2 | 38 | 36 | 35,2 | 50,2 | 2,5 | 1,75 | 1,85 | | | 2.31 $ (USD) | | | K1938.401750 | steel | 6 | 4,4 | 40 | 37,5 | 36,5 | 52,6 | 2,5 | 1,75 | 1,85 | | | 2.64 $ (USD) | | | K1938.451750 | steel | 6,7 | 4,7 | 45 | 42,5 | 41,5 | 59,1 | 2,5 | 1,75 | 1,85 | | | 3.13 $ (USD) | | | K1938.471750 | steel | 6,8 | 4,9 | 47 | 44,5 | 43,5 | - | 2,5 | 1,75 | 1,85 | | | 3.36 $ (USD) | | | K1938.502000 | steel | 6,9 | 5,1 | 50 | 47 | 45,8 | 64,5 | 2,5 | 2 | 2,15 | | | 4.11 $ (USD) | | | K1938.552000 | steel | 7,2 | 5,4 | 55 | 52 | 50,8 | 70,2 | 2,5 | 2 | 2,15 | | | 4.17 $ (USD) | | | K1938.602000 | steel | 7,4 | 5,8 | 60 | 57 | 55,8 | 75,6 | 2,5 | 2 | 2,15 | | | 4.81 $ (USD) | | | K1938.752500 | steel | 8,4 | 7 | 75 | 72 | 70,5 | 92,7 | 3 | 2,5 | 2,65 | | | 8.14 $ (USD) | | | K1938.040401 | stainless steel | 2,2 | 0,9 | 4 | 3,8 | 3,7 | 8,6 | 1 | 0,4 | 0,5 | | | 0.49 $ (USD) | | | K1938.050601 | stainless steel | 2,5 | 1,1 | 5 | 4,8 | 4,7 | 10,3 | 1 | 0,6 | 0,7 | | | 0.49 $ (USD) | | | K1938.060701 | stainless steel | 2,7 | 1,3 | 6 | 5,7 | 5,6 | 11,7 | 1,2 | 0,7 | 0,8 | | | 0.49 $ (USD) | | | K1938.070801 | stainless steel | 3,1 | 1,4 | 7 | 6,7 | 6,5 | 13,5 | 1,2 | 0,8 | 0,9 | | | 0.61 $ (USD) | | | K1938.080801 | stainless steel | 3,2 | 1,5 | 8 | 7,6 | 7,4 | 14,7 | 1,2 | 0,8 | 0,9 | | | 0.65 $ (USD) | | | K1938.091001 | stainless steel | 3,3 | 1,7 | 9 | 8,6 | 8,4 | 16 | 1,2 | 1 | 1,1 | | | 0.77 $ (USD) | | | K1938.101001 | stainless steel | 3,3 | 1,8 | 10 | 9,6 | 9,3 | 17 | 1,5 | 1 | 1,1 | | | 0.77 $ (USD) | | | K1938.121001 | stainless steel | 3,3 | 1,8 | 12 | 11,5 | 11 | 19 | 1,7 | 1 | 1,1 | | | 0.84 $ (USD) | | | K1938.141001 | stainless steel | 3,5 | 2,1 | 14 | 13,4 | 12,9 | 21,4 | 1,7 | 1 | 1,1 | | | 1.14 $ (USD) | | | K1938.151001 | stainless steel | 3,6 | 2,2 | 15 | 14,3 | 13,8 | 22,6 | 1,7 | 1 | 1,1 | | | 1.23 $ (USD) | | | K1938.161001 | stainless steel | 3,7 | 2,2 | 16 | 15,2 | 14,7 | 23,8 | 1,7 | 1 | 1,1 | | | 1.24 $ (USD) | | | K1938.171001 | stainless steel | 3,8 | 2,3 | 17 | 16,2 | 15,7 | 25 | 1,7 | 1 | 1,1 | | | 1.72 $ (USD) | | | K1938.181201 | stainless steel | 3,9 | 2,4 | 18 | 17 | 16,5 | 26,2 | 2 | 1,2 | 1,3 | | | 2.01 $ (USD) | | | K1938.191201 | stainless steel | 3,9 | 2,5 | 19 | 18 | 17,5 | 27,2 | 2 | 1,2 | 1,3 | | | 2.26 $ (USD) | | | K1938.201201 | stainless steel | 4 | 2,6 | 20 | 19 | 18,5 | 28,4 | 2 | 1,2 | 1,3 | | | 2.35 $ (USD) | | | K1938.221201 | stainless steel | 4,2 | 2,8 | 22 | 21 | 20,5 | 30,8 | 2 | 1,2 | 1,3 | | | 2.92 $ (USD) | | | K1938.241201 | stainless steel | 4,4 | 3 | 24 | 22,9 | 22,2 | 33,2 | 2 | 1,2 | 1,3 | | | 3.08 $ (USD) | | | K1938.251201 | stainless steel | 4,4 | 3 | 25 | 23,9 | 23,2 | 34,2 | 2 | 1,2 | 1,3 | | | 3.19 $ (USD) | | | K1938.261201 | stainless steel | 4,5 | 3,1 | 26 | 24,9 | 24,2 | 35,5 | 2 | 1,2 | 1,3 | | | 3.33 $ (USD) | | | K1938.281501 | stainless steel | 4,7 | 3,2 | 28 | 26,6 | 25,9 | 37,9 | 2 | 1,5 | 1,6 | | | 3.43 $ (USD) | | | K1938.301501 | stainless steel | 5 | 3,5 | 30 | 28,6 | 27,9 | 40,5 | 2 | 1,5 | 1,6 | | | 3.62 $ (USD) | | | K1938.321501 | stainless steel | 5,2 | 3,6 | 32 | 30,3 | 29,6 | 43 | 2,5 | 1,5 | 1,6 | | | 3.92 $ (USD) | | | K1938.351501 | stainless steel | 5,6 | 3,9 | 35 | 33 | 32,2 | 46,8 | 2,5 | 1,5 | 1,6 | | | 4.20 $ (USD) | | | K1938.381751 | stainless steel | 5,8 | 4,2 | 38 | 36 | 35,2 | 50,2 | 2,5 | 1,75 | 1,85 | | | 4.64 $ (USD) | | | K1938.401751 | stainless steel | 6 | 4,4 | 40 | 37,5 | 36,5 | 52,6 | 2,5 | 1,75 | 1,85 | | | 5.04 $ (USD) | | | K1938.451751 | stainless steel | 6,7 | 4,7 | 45 | 42,5 | 41,5 | 59,1 | 2,5 | 1,75 | 1,85 | | | 5.71 $ (USD) | | | K1938.502001 | stainless steel | 6,9 | 5,1 | 50 | 47 | 45,8 | 64,5 | 2,5 | 2 | 2,15 | | | 5.18 $ (USD) | | | K1938.552001 | stainless steel | 7,2 | 5,4 | 55 | 52 | 50,8 | 70,2 | 2,5 | 2 | 2,15 | | | 5.72 $ (USD) | | | K1938.602001 | stainless steel | 7,4 | 5,8 | 60 | 57 | 55,8 | 75,6 | 2,5 | 2 | 2,15 | | | 6.67 $ (USD) | | | K1938.752501 | stainless steel | 8,4 | 7 | 75 | 72 | 70,5 | 92,7 | 3 | 2,5 | 2,65 | | | 12.79 $ (USD) | |
|
|
Order catalogue Interested in our new catalog?
Contact us...more... |
|
|
|
