Products

Catalog / Service

Download
- KIPP Catalog
  
  Brochures
  
  CAD data
  
  Certificates
  
  Thread Pitch Chart
Ordering / Distributors
- Form RFQ
  
  Distributors regional/national

Home
Company

Product groups

Catalog / Service

Callback

Polyamide	go back
Catalog / Service Material overview Thermoplast Polyamide

Polyamide (PA 6.6)
Polyamide with 50% glass fibres (PA 6.6 GF 50)

Short designation	PA 6.6	PA 6.6 GF 50
Description	Polyamide (polycondensate)	Polyamide with 50% glass fibre
Mechanical properties
Test specimen condition	Dry/damp	Dry/damp
Tensile strength [MPa]	No info	230/180
Elastic modulus (tensile) [MPa]	3100/1100	16000/12500
Ball indentation hardness [MPa]	160/100	300/260
Physical properties
Density [g/cm³]	1.14	1.55
Melting point [°C]	260	260
Application temperatures
Max. temp., short-term [°C]	200	240
Max. temp., continuous [°C]	100	130
Min. application temp. [°C]	-40	-40
Other properties
Flammability according to UL 94	V-2	HB
Water absorption (normal climate) [%]	2.8	1.2
Chemical resistance
Mineral grease and oils	+	+
Petrol	+	+
Weak/strong acids	o/-	o/-
Weak/strong alkalis	+/o	o/-
Perchloroethylene	+	+
Trichloroethylene	+	+
Acetone	+	+
Alcohols	+	+
Hydrolysis resistance (hot water)	o	o
Weather/UV radiation	o	o

+ resistant / o limited resistance / - not resistant

This information is for reference only; we do not assume any liability for its accuracy. The properties of thermoplastics are highly dependent on their specific composition and their additives.

Back to overview