- Adjustable Handles
- Indexing Plungers
- Spring Plungers
- Ball Lock Pins
- Toggle Clamps
- Clamping devices
- Knobs
- Handwheels
- Quarter-turn locks, compression latches
- Pull Handles
- Tube Connectors
- Telescopic slides
- Hinges
- Rubber Buffers
- Latches
- Swivel feet, levelling feet
- Locating Components
- Leveling Elements
- Machine & Fixture Components
- Joints
- Magnets
- Level indicators, screw plugs
- Material handling
- Tools
- K1361
Sockets and plastic inserts
- K1362
Combination spanner with protective caps
- K1629
Clip-in bins, plastic,
for type I and type B profile slots and mounting profiles
- K1629
Clip-in bins, antistatic plastic,
for type I and type B profile slots and mounting profiles
- K1630
Swivel adapter, plastic,
for profile slots
- K1630
Swivel adapter, antistatic plastic,
for profile slots
- K1631
Clip-in shell bins, plastic,
for profile slots type I and type B and mounting profiles
- K1631
Clip-in shell bins, antistatic plastic,
for profile slots type I and type B and mounting profiles
- K1632
Cup holder plastic
for aluminium profiles, closed or open
- K1632
Cup holder plastic, antistatic
for aluminium profiles, closed or open
- Product lines KIPP Inc.
|
|
|
K1361Sockets and plastic inserts |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Socket tool steel.
Insert special PETP.Version:Socket chromium-plated.Note:Socket:
Socket with 1/2" drive, made by Hazet. Specially modified, for holding the plastic inserts. The plastic inserts are securely held by the inner form and length of the socket. Optimal drive torque is transmitted to the screw head. By careful use, metallic contact between the socket and the hex head is prevented. Contact corrosion is eliminated.
Plastic insert:
Plastic inserts for tightening and loosening the screws and nuts of the KIPP product range NOVOnox hygienic. Polished and sensitive surfaces are protected and a later contact corrosion is avoided.
The plastic inserts are made from a specially manufactured PETP and have FDA approval. The inserts are pressed into the special socket manually. The form fit and locking device ensures an optimal hold in the socket. No special tools are required to exchange the worn out inserts.
By a tightening torque of µ 0.12 coefficient of friction (DIN for A4-70 for screws and nuts), the plastic inserts have a life expectancy of up to 1000 alternating cycles.Drawing reference:A) Socket
B) Plastic insert DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
| Item No. | D
| D1 | L | T | SW | CAD | Acc. | Price | Order |
|---|
| K1361.1012 | 15,3 | 22 | 36,6 | 10,6 | 10 |  | | on request | | | K1361.1112 | 16,6 | 22 | 37,3 | 10,1 | 11 | | | on request | | | K1361.1312 | 19,1 | 22 | 37,3 | 10,6 | 13 | | | on request | | | K1361.1612 | 22,9 | 23,6 | 37,1 | 11,3 | 16 | | | on request | | | K1361.1912 | 26,6 | 23 | 37 | 13,2 | 19 | | | on request | | | K1361.2112 | 29 | 25 | 36,8 | 12,9 | 21 | | | on request | | | K1361.2712 | 35,2 | 25 | 44,4 | 18,1 | 27 | | | on request | |
| Item No. | L
| T | SW | SW1 | Suitable for
hexagon screws | CAD | Acc. | Price | Order |
|---|
| K1361.0704 | 17,4 | 5,5 | 10 | 7 | M4 | | | on request | | | K1361.0805 | 18 | 6 | 11 | 8 | M5 | | | on request | | | K1361.1006 | 19,5 | 10 | 13 | 10 | M6 | | | on request | | | K1361.1308 | 21,5 | 11 | 16 | 13 | M8 | | | on request | | | K1361.1610 | 22 | 13,5 | 19 | 16 | M10 | | | on request | | | K1361.1812 | 21,5 | 12 | 21 | 18 | M12 | | | on request | | | K1361.2416 | 26,5 | 18 | 27 | 24 | M16 | | | on request | |
Other items in this category |
|
|
