Indexing Plungers pull knob, short Version, Style B, metric

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers pull knob, short version
      - Indexing Plungers pull knob, short Version, Style B, metric

Item description/product images

DescriptionMaterial:Steel version
Indexing pin hardened:
quality class 5.8

Stainless steel version
Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob black-gray thermoplastic.Version:Steel version:
Indexing pin hardened, ground and black oxide finish.

Stainless steel version:
Indexing pin not hardened, ground, bright.Note:For the inch series, dimensions D1 and SW2 are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.On request:Special versions.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0631_B Metric Indexing Plungers pull knob, short Version, Style B, metric

167 kB

Drawings

Overview of items (compressed)

Item selection/filter

Item No. steel short version	Item No. stainless steel short version	Style	D	D1	D2	L	L1	L2	Stroke S	SW1	SW2	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
K0631.6903	K0631.16903	B	3	M6x0,75	14	25,5	6	5	3,5	8	10	0,8	4	10
K0631.6004	K0631.16004	B	4	M8x1	18	29,5	6	6	4	10	13	1	4	12
K0631.6105	K0631.16105	B	5	M10x1	21	34,5	8	7	5	13	17	1,3	5	12
K0631.6206	K0631.16206	B	6	M12x1,5	25	41,7	10	8	6	14	19	1,8	6	14
K0631.6308	K0631.16308	B	8	M16x1,5	33	54	12	10	8	19	24	2,3	14	28
K0631.6410	K0631.16410	B	10	M20x1,5	33	61	15	12	10	22	30	2,8	15	32