Indexing Plungers pull knob all stainless steel, Style A, inch

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers pull knob, stainless steel
      - Indexing Plungers pull knob all stainless steel, Style A, inch

Item description/product images

DescriptionMaterial:Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob 1.4305 (AISI 303 equivalent), electropolished.Version:Bright.
Indexing pin ground.Note:For the inch series, dimensions D1 and SW2 are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back. On request:Special versions.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0632_A Inch Indexing Plungers pull knob all stainless steel, Style A, inch

157 kB

Drawings

Item selection/filter

Item No.	Style	Main material	locating pin	D	D1	D2	L	L1	L2	L3	H	SW1	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Price
K0632.001903AJ	A	stainless steel	hardened	3	1/4-28	14	34,5	12	5	10	3,5	8	0,8	4,5	10	on request
K0632.001004AK	A	stainless steel	hardened	4	5/16-24	18	43	15	6	13	4	10	1	6	12	on request
K0632.001105AL	A	stainless steel	hardened	5	3/8-24	21	50	17	7	15	5	13	1,3	4,5	12	on request
K0632.001206A5	A	stainless steel	hardened	6	1/2-13	25	59	20	8	17	6	14	1,8	6	14	on request
K0632.001308A6	A	stainless steel	hardened	8	5/8-11	33	77	26	10	23	8	19	2,3	15	35	on request
K0632.001410A7	A	stainless steel	hardened	10	3/4-10	33	83	28	12	25	10	22	2,6	15	34	on request
K0632.001412AO	A	stainless steel	hardened	12	3/4-16	33	87	28	14	25	12	22	2,8	15	39	on request
K0632.001516A8	A	stainless steel	hardened	16	1-8	40	106	32	18	28	16	27	3,2	20	46	on request
K0632.111903AJ	A	stainless steel	not hardened	3	1/4-28	14	34,5	12	5	10	3,5	8	0,8	4,5	10	on request
K0632.111004AK	A	stainless steel	not hardened	4	5/16-24	18	43	15	6	13	4	10	1	6	12	on request
K0632.111105AL	A	stainless steel	not hardened	5	3/8-24	21	50	17	7	15	5	13	1,3	4,5	12	on request
K0632.111206A5	A	stainless steel	not hardened	6	1/2-13	25	59	20	8	17	6	14	1,8	6	14	on request
K0632.111308A6	A	stainless steel	not hardened	8	5/8-11	33	77	26	10	23	8	19	2,3	15	35	on request
K0632.111410A7	A	stainless steel	not hardened	10	3/4-10	33	83	28	12	25	10	22	2,6	15	34	on request
K0632.111412AO	A	stainless steel	not hardened	12	3/4-16	33	87	28	14	25	12	22	2,8	15	39	on request
K0632.111516A8	A	stainless steel	not hardened	16	1-8	40	106	32	18	28	16	27	3,2	20	46	on request