Indexing Plungers, all stainless steel, Style G, metric

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers without collar, stainless steel
      - Indexing Plungers, all stainless steel, Style G, metric

Item description/product images

DescriptionMaterial:Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob 1.4305 (AISI 303 equivalent), electropolished.Version:Bright.
Indexing pin ground.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot.On request:Special versions.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0634_G Metric Indexing Plungers, all stainless steel, Style G, metric

154 kB

Drawings

Overview of items (compressed)

Item selection/filter

Order No. hardened	Order No. not hardened	style	D	D1	D2	L	L1	L2	H	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Item No. installation tool
K0634.001903	K0634.111903	G	3	M6x0,75	14	34,5	17	14	-	0,8	4,5	10	K0344.99
K0634.001004	K0634.111004	G	4	M8x1	18	43	21	18	-	1	6	12	K0344.90
K0634.001105	K0634.111105	G	5	M10x1	21	50	24	21	-	1,3	5	12	K0344.91
K0634.001206	K0634.111206	G	6	M12x1,5	25	59	28	25	-	1,8	6	14	K0344.92
K0634.001308	K0634.111308	G	8	M16x1,5	33	77	36	33	-	2,3	15	35	K0344.93
K0634.001410	K0634.111410	G	10	M20x1,5	33	83	40	33	-	2,8	15	34	K0344.94
K0634.001412	K0634.111412	G	12	M20x1,5	33	87	42	33	-	2,8	15	39	K0344.94
K0634.001516	K0634.111516	G	16	M24x2	40	106	50	40	-	3,2	20	46	K0344.95