- NEW Product Innovations
- K1875
Hand wheels, steel, stamped
- K1876
Handwheels sheet stainless steel
- K2010
Snap locks, plastic with recessed grip, snap-in
- K2011
Snap locks, plastic with recessed grip, snap-in
- K0274
Wing grips “Miniwing”
- K0658
Wing grips “Miniwing”
tapped through
- K1640
Pull handles stainless steel, oval with thru hole
- K2068
Clamping bolt flexible
- K2069
Clamping screw with clamping ring for flexible clamping bolt
- K2070
Clamping ring for flexible clamping bolt
- K2071
Extensions for flexible clamping bolt
- K2072
Slot straps for flexible clamping bolt
- K2099
DIN 433 washer, steel or stainless steel
- K2088
Steel telescopic slides
for side mounting, full extension, load capacity up to 68 kg
- K2089
Steel telescopic slides
for side mounting, partial extension, load capacity up to 68 kg
- K2090
Steel telescopic slides
for side mounting, full extension, load capacity up to 68 kg
- K2091
Steel telescopic slides
for side mounting, over-extension, load capacity up to 68 kg
- K2092
Stainless steel telescopic slides
for side mounting, over-extension, load capacity up to 90 kg
- K2093
Mounting bracket, steel,
for telescopic slides
- K2094
Mounting bracket, steel,
for telescopic slides
- K2095
Mounting bracket, steel,
for telescopic slides
- K2096
Mounting bracket, stainless steel,
for telescopic slides
- K2097
Grip with locking unit, steel
- K0747
Indexing plungers ECO
- K1367
Edge protection profiles with steel retaining strip
- K1368
Edge protection sealing profiles with integrated steel wire core
- K1696
Flat clamps
with cam
- K1697
Side clamp
- K1964
Hinges stainless steel, separable,
dismountable
- K2056
Bearing flange
for feed roller
- K2057
Aluminium profiles D50
Type I, tube
- K2058
Face pin spanner
adjustable, cranked
- K2059
Slotted round nuts, steel,
DIN 70852
- K2060
Slotted round nuts, steel or stainless steel,
DIN 981
- K2061
Locking plate steel DIN 70952
- K2062
Locking plate steel DIN 462
- K2063
Locking plate steel or stainless steel
DIN 5406
- K2064
Rigid couplings
one-piece
- K2065
Rigid couplings
two-piece
- K1849
Tubular handles, aluminium or stainless steel
- K1872
Clamping levers ECO, plastic
with female thread
- K1872
Clamping levers ECO, plastic
with male thread
- K1743
Clamping levers ECO, plastic
with female thread, threaded insert stainless steel
- K1743
Clamping levers ECO, plastic
with male thread, threaded insert stainless steel
- K1553
Clamping levers, plastic
with female thread and safety function
- K1553
Clamping levers, plastic
with male thread and safety function
- K1873
Clamping levers, plastic
with female thread and safety function, thread insert stainless steel
- K1873
Clamping levers, plastic
with male thread and safety function, thread insert stainless steel
- K0190
Pull handles biopolymer
- K1060
Pull handles biopolymer
- K0251
Mushroom knobs biopolymer
internal thread
- K0251
Mushroom knobs biopolymer
external thread
- K0247
Knurled knobs biopolymer
- K0154
Star grips biopolymer, similar to DIN 6336
- K0274
Wing grips "Miniwing" biopolymer
- K1963
Hinges plastic, separable,
dismountable
- K1634
Pull handles aluminium, oval, slanted
- K1795
Recessed handle, aluminium, fold-down
- K2018
Telescopic slides, steel
Double-T form, full extension, load capacity up to 305 kg
- K2019
Telescopic slides, steel
double arrangement, full extension, load capacity up to 133 kg
- K2020
Telescopic slides, steel
partial extension, load capacity up to 741 kg
- K2021
Telescopic slides, steel
S-form, full extension, load capacity up to 459 kg
- K2022
Linear ball bearing
with internal race, steel, load capacity up to 3,959 kg
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K2051
Rubber buffers, steel
type KRA spherical with male thread
- K0576
Rubber buffers type KE spherical with female thread
- K2052
Grub screws with hex socket and pin
DIN EN ISO 4028
- K2067
Toggle clamps, steel, black, horizontal with horizontal foot and adjustable clamping spindle
- K2066
Toggle clamps, steel, black, vertical with horizontal foot and adjustable clamping spindle
- K1640
Pull handles stainless steel, oval
- K1811
Star grips, plastic with safety function
- K1811_IG_inch
Star grips, plastic with safety function, with female thread, inch
- K1811_AG_inch
Star grips, plastic with safety function, with male thread, inch
- K1811_IG_metric
Star grips, plastic with safety function, with female thread, metric
- K1811_AG_metric
Star grips, plastic with safety function, with male thread, metric
- K0154
Star grips with safety cable
similar to DIN 6336, metal parts stainless steel
- K0154
Star grips
similar to DIN 6336, metal parts stainless steel
- K2013
Dowel pins ISO 2338
- K2014
Linchpins DIN 11023
- K1966
Round aluminium tubes
with slots
- K1967
Rotation locks
plastic for tube clamps
- K2044
Hoist screws VDI 3366
- K2045
Hoist pins VDI 3366
- K2054
Swing clamps, heavy duty
- K2053
Swing clamps, heavy duty
extended clamping travel
- K2049
Cam clamps, steel with tension lever
- K2048
Cam clamps steel
- K2050
Clamping plates stainless steel
for cam clamp
- K2030
Cover caps plastic
for hex bolts and nuts
- K2032
Plugs with tapped hole, plastic
for round tubes
- K2031
Plugs with tapped hole, plastic
for square tubes
- K2035
Adjustment plugs, plastic with felt glide surface
for round and square tubes
- K2034
Adjustment plugs, plastic with non-slip inserts
for round and square tubes
- K2033
Adjustment plugs, plastic without inserts
for round and square tubes
- K2028
Protective caps, plastic
for round tubes
- K2029
Protective caps, plastic
for square tubes
- K2036
Plugs, plastic with felt glide surface
for round and square tubes
- K0494
Tube end plugs, plastic
for round and square tubes
- K2037
Beam couplings aluminium
with clamping hubs
- K2038
Beam couplings stainless steel
with clamping hubs
- K2039
Beam couplings aluminium
with detachable clamp hubs
- K2040
Beam couplings stainless steel
with detachable clamp hubs
- K1178
Spring hinges
aluminium profile, 0.2 Nm
- K1665
Spring hinges
aluminium profile, 0.50 Nm
- K1666
Spring hinges
aluminium profile, 0.7 Nm, long version
- K1667
Spring hinges
aluminium profile, 0.9 Nm, long version
- K1179
Spring hinges
aluminium profile, 0.35 Nm
- K1182
Spring hinges
aluminium profile, 3.8 Nm
- K1518
Hinges, stainless steel
with preset friction
- K1517
Hinges, stainless steel
- K1850
Snap locks stainless steel
with grip, fold-down
- K1851
Snap locks stainless steel
with Bowden cable connection and grip, fold-down
- K1670
Cam-action indexing plungers
- K1671
Cam-action indexing plungers stainless steel
- K1672
Cam-action indexing plungers
- K1673
Cam-action indexing plungers stainless steel
- K1674
Cam-action indexing plungers with stop
- K1675
Cam-action indexing plungers with stop, stainless steel
- K1679
Cam-action indexing plunger,
with hexagon
- K1680
Cam-action indexing plunger, stainless steel, with hexagon
- K0123
Clamping lever, die-cast zinc with extended collar
with male thread, steel parts stainless steel
- K0124
Clamping lever, stainless steel with extended collar
with male thread, steel parts stainless steel
- K1701
Clamping lever, plastic with extended collar
with male thread, steel parts stainless steel
- K1877
Pull handles, plastic with soft grip
- K1968
Washers DIN 7349 for bolts used for heavy-duty applications
- K1897
Hinges die-cast zinc
- K1898
Hinges die-cast zinc
adjustable
- K1899
Hinges die-cast zinc
with fastening screws
- K1900
Hinges stainless steel
adjustable
- K2015
Slot key profile connectors
Type I
- K2016
Slot key direct connectors
Type I
- K2017
Angle steel
- K2012
Rubber-metal overhead element
- K1965
Centring clamp, steel, round
- K1641
Pull handles, aluminium
- K1839
Positioning bushes, steel or stainless steel with status sensor
- K1840
Positioning bushes, steel or stainless steel for status sensor
- K1841
Locating bushes, stainless steel with status sensor
- K1842
Locating bushes, stainless steel for status sensor
- K1843
Locating bushes, stainless steel with status sensor, for ball lock pins with twist knob
- K1844
Locating bushes, stainless steel for status sensor, for ball lock pins with twist knob
- K0338
Indexing Plungers
pull knob
- K0632
Indexing Plungers pull knob, stainless steel
- K0250
Mushroom Knobs stainless steel
- K0665
Spacer rings stainless steel
- K0700
Hexagon nuts thin DIN 439 / ISO 4035
- K1854
Support elements, hydraulic, screw-on
single-acting with spring return
- K1855
Side clamps, hydraulic
single-acting with spring return
- K1856
Rotary lever clamps, hydraulic
double / single-acting with spring return
- K1857
Tension levers for rotary lever clamps
- K1858
Link clamp, hydraulic
double-acting
- K1859
Block cylinder, hydraulic with metal wiper
double / single acting with spring return
- K1860
Screw-in hydraulic cylinder
double-acting
- K1861
Screw-in hydraulic cylinder
single-acting with spring return
- K1862
Swing clamps, hydraulic, compact
double / single-acting with spring return
- K1863
Clamping arm
for compact hydraulic swing clamps
- K1864
Swing clamps, hydraulic
double / single-acting with spring return
- K1865
Clamping arm
for hydraulic swing clamps
- K1870
Rotary lever clamps, pneumatic
double-acting
- K0851
Hook clamp holders
- K0705
Shoulder screws
similar to ISO 7379
- K1969
Replacement screw for cam screws
- K1970
Replacement screw for mandrel collets
- Couplings
- K1908
Cylindrical pins
DIN 6325
- K1909
Cylindrical pins with internal thread
DIN EN ISO 8735
- K1948
Clamp straps
tapped-heel
- K1949
Clamp straps
with flattened ball
- K1950
Clamp straps gooseneck
narrow, steel
- K1951
Clamp straps gooseneck
DIN 6316 wide, steel or aluminium
- K1952
Clamp straps open U
DIN 6315, steel or aluminium
- K1953
Clamp straps open U
flat pin, steel or aluminium
- K1954
Clamp straps pivot
strap only or assembly
- K1955
Clamp straps mini
double sided
- K1956
Clamp straps pivot
steel
- K1957
Talon grips round
- K1958
Talon grips
- K1910
Studs
- K1911
Nuts for T-slots
long
- K1912
Slot key profile
type I
- K1913
Ball-end thrust screws without head
short version
- K1914
Gripper pads round
carbide
- K1915
Gripper pads square
carbide
- K1916
Thrust pads
with retaining pin
- K1938
Circlips for shafts
DIN 471
- K1939
Circlips for bores
DIN 472
- K1940
Circlips E-type
DIN 6799
- K1917
Slotted round nuts
DIN 1804
- K1918
Slotted nuts
with elastic lock
- K1960
Threaded rods
steel and stainless steel DIN 976-1
- K1919
Lifting pins
self-locking, stainless steel
- K1920
Lifting pins
self-locking
- K1921
Locating bushes
for ball lifting pins stainless steel, flat
- K1922
Receiver bushes
for ball lifting pins, stainless steel
- K1923
Shaft collars one-piece,
wide, slitted outside
- K1924
Shaft collars one-piece,
wide, slitted inside
- K1925
Shaft collars two-piece
wide
- K1905
Position indicator
quasi-absolute, mains-independent, indicator accuracy 10 µm, small design
- K1906
Position indicator
quasi-absolute, mains-independent, indicator accuracy 10 µm
- K1959
Magnetic sensors
passive sensors, miniature design
- K1926
Hollow shaft sensors
with magnetic scanning
- K1927
Reducer sleeves
- K1928
Adjusting knobs with position indicator
digital display
- K1929
Position indicators for handwheels
analogue-digital display
- K1930
Handwheels for position indicators
- K1931
Rubber impact buffers
type TP door buffer
- K1932
Rubber-metal impact buffer rails
- K1933
O-shaped mounts
- K1907
Neoprene connecting isolators, two-piece
- K1934
Clevis joints for rod ends
- K1935
Clevis joints for rod ends
stainless steel
- K1936
Axial joints for tractive forces
adjustable
- K1937
Ducks feet
- K0787
Hook wrench with lug
DIN 1810A enhanced
- K1520
Disc handwheels, aluminium without grip
- K1521
Disc handwheels, aluminium with revolving cylindrical grip
- K1522
Disc handwheels, aluminium with fold-down cylindrical grip
- K1523
2-spoke handwheels, aluminium without grip
- K1524
2-spoke handwheels, aluminium with revolving cylinder grip
- K1525
2-spoke handwheels, aluminium with fold-down cylinder grip
- K1347
Strap hinges,
steel or stainless steel
- K1852
Hinges, stainless steel
- K1853
Hinges, stainless steel
with fastening screws
- K0266
Crank Handles with fold-away grip
- K0268
Crank handles with safety grip
- K0659
Crank Handles with revolving grip
- K0996
Crank handles aluminium with revolving grip
- K0997
Crank handles aluminium with fold-away grip
- K0998
Crank handles aluminium with safety grip
- K1794
Palm grips, plastic with protruding steel bush
- Newsletters
- Product Overview
- Press Releases
|
|
|
K1811_AG_inchStar grips, plastic with safety function, with male thread, inch |
go back |
|
Item description/product images |
|
|
DescriptionProduct description:Star grips with safety function prevent changes to the clamping point by accidental opening or closing.
In its initial state, the grip can turn freely and has no connection to the clamping point. It is only when the grip is pushed down that the toothing engages and the clamp can be loosened or tightened.
A spring returns the grip to the start position upon release.Material:Star grip and insert made from reinforced thermoplastic.
Screw steel or stainless steel.Version:Steel trivalent blue passivated.
Stainless steel, bright.Advantages:Protection against accidental opening or closing.On request:Special versions.Special features: |
| Order No. | Thread type | Main
colour | Component
material | Size | D | D1 | D2 | D8 | H | H1 | H4 | L | No. of
teeth
| CAD | Acc. | Price | Order |
|---|
| K1811.32AE1X10 | external thread | jet black RAL 9005 | steel | 1 | 8-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 10 | 12 |  | | 15.11 $ (USD) | | | K1811.32AE1X20 | external thread | jet black RAL 9005 | steel | 1 | 8-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 20 | 12 | | | 15.11 $ (USD) | | | K1811.32A11X10 | external thread | jet black RAL 9005 | steel | 1 | 10-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 10 | 12 | | | 15.11 $ (USD) | | | K1811.32A11X20 | external thread | jet black RAL 9005 | steel | 1 | 10-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 20 | 12 | | | 15.11 $ (USD) | | | K1811.40A11X20 | external thread | jet black RAL 9005 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A11X30 | external thread | jet black RAL 9005 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A11X40 | external thread | jet black RAL 9005 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.40A21X20 | external thread | jet black RAL 9005 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A21X30 | external thread | jet black RAL 9005 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A21X40 | external thread | jet black RAL 9005 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.40A31X20 | external thread | jet black RAL 9005 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A31X30 | external thread | jet black RAL 9005 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A31X40 | external thread | jet black RAL 9005 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.50A31X20 | external thread | jet black RAL 9005 | steel | 3 | 5/16-18 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 20 | 12 | | | 17.88 $ (USD) | | | K1811.50A31X40 | external thread | jet black RAL 9005 | steel | 3 | 5/16-18 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 40 | 12 | | | 17.88 $ (USD) | | | K1811.50A41X20 | external thread | jet black RAL 9005 | steel | 3 | 3/8-16 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 20 | 12 | | | 17.88 $ (USD) | | | K1811.50A41X40 | external thread | jet black RAL 9005 | steel | 3 | 3/8-16 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 40 | 12 | | | 17.88 $ (USD) | | | K1811.32AE84X10 | external thread | traffic red RAL 3020 | steel | 1 | 8-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 10 | 12 | | | 15.11 $ (USD) | | | K1811.32AE84X20 | external thread | traffic red RAL 3020 | steel | 1 | 8-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 20 | 12 | | | 15.11 $ (USD) | | | K1811.32A184X10 | external thread | traffic red RAL 3020 | steel | 1 | 10-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 10 | 12 | | | 15.11 $ (USD) | | | K1811.32A184X20 | external thread | traffic red RAL 3020 | steel | 1 | 10-32 | 32 | 10 | 14 | 25 | 5 | 22,1 | 20 | 12 | | | 15.11 $ (USD) | | | K1811.40A184X20 | external thread | traffic red RAL 3020 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A184X30 | external thread | traffic red RAL 3020 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A184X40 | external thread | traffic red RAL 3020 | steel | 2 | 10-32 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.40A284X20 | external thread | traffic red RAL 3020 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A284X30 | external thread | traffic red RAL 3020 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A284X40 | external thread | traffic red RAL 3020 | steel | 2 | 1/4-20 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.40A384X20 | external thread | traffic red RAL 3020 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 20 | 12 | | | 16.29 $ (USD) | | | K1811.40A384X30 | external thread | traffic red RAL 3020 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 30 | 12 | | | 16.29 $ (USD) | | | K1811.40A384X40 | external thread | traffic red RAL 3020 | steel | 2 | 5/16-18 | 40 | 13,5 | 18 | 30,5 | 5,5 | 26,6 | 40 | 12 | | | 16.29 $ (USD) | | | K1811.50A384X20 | external thread | traffic red RAL 3020 | steel | 3 | 5/16-18 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 20 | 12 | | | 17.88 $ (USD) | | | K1811.50A384X40 | external thread | traffic red RAL 3020 | steel | 3 | 5/16-18 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 40 | 12 | | | 17.88 $ (USD) | | | K1811.50A484X20 | external thread | traffic red RAL 3020 | steel | 3 | 3/8-16 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 20 | 12 | | | 17.88 $ (USD) | | | K1811.50A484X40 | external thread | traffic red RAL 3020 | steel | 3 | 3/8-16 | 50 | 17 | 22 | 41,9 | 10 | 37,1 | 40 | 12 | | | 17.88 $ (USD) | |
Other items in this category |
|
|
Order catalogue Interested in our new catalog?
Contact us...more... |
|
|
|
