KIPP uses cookies to optimally design and continually improve the website.
By continuing to use this website, you agree to the use of cookies.

okay
Product groups
Wedg eclampsmachinable
K0649

Wedg eclamps machinable

go back

Item description/product images

DescriptionMaterial:Wedge and jaw segments carbon steel.Version:Wedge and jaw segments tempered, black.Note:These wedge clamps have extra long jaws. This extra material allows the jaws to machined to suit the form of the workpiece.
The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces.
These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.

Spread width:
M8 = ±0.5 mm
M10 = ±1.0 mm
M12 = ±1.0 mm
M16 = ±1.5 mm
Note:These wedge clamps have a machining allowance per jaw of 3 mm for version M8 and 5 mm for versions M10, M12 and M16.Drawing reference:
1) wedge clamps
2) workpiece
3) fixed stop
4) base plate
5) hydraulic/pneumatic cylinder
Special features:
RoHS

Drawings

Wedg eclampsmachinable

Item selection/filter

Order No.

Version

A
min.
A
max.
BCEF
DIN 6912
cap screw
Clamping
force
kN
Tightening
torque
Nm
CADAcc.PriceOrder
K0649.3108narrow36,539,524152M8x251119on request
K0649.3110narrow424728193,5M10x251537on request
K0649.3112narrow5459,530223,5M12x402365on request
K0649.3116narrow657240294M16x6038160on request
K0649.3208wide36,539,530152M8x251119on request
K0649.3210wide424738193,5M10x251537on request
K0649.3212wide5459,548223,5M12x402365on request
K0649.3216wide657248294M16x6038160on request
Search
Availability
Here you can check item's availability.
Canada
Sitemap Print Newsletter Top
Copyright © 2018 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · information@kipp.com · General Terms and Conditions