- Product Lines
- Clamping Levers
- Indexing Plungers
- Spring Plungers
- Ball Lock Pins
- Toggle Clamps
- Clamping devices
- Knobs
- Handwheels
- Quarter-turn locks, compression latches
- Pull Handles
- Tube Connectors
- K0472
Tube clamps, cross, plastic
- K0472
Tube clamps, cross, aluminium
- K0472
Tube clamps, cross, aluminium
- K0472
Tube clamps cross stainless steel
- K0473
Tube clamps, cross, plastic
- K0473
Tube clamps cross aluminium
- K0474
Tube clamps, cross, plastic
- K0474
Tube clamps, cross, aluminium
- K0475
Tube clamps T-angle plastic
- K0475
Tube clamps T-angle, plastic with ball joint
- K0475
Tube clamps T-angle aluminium
- K0475
Tube clamps T-angle, aluminium with ball joint
- K0475 metric
Tube clamps T-angle stainless steel
- K0476
Tube clamps T-angle plastic
- K0476
Tube clamps T-angle aluminium
- K0476
Tube clamps right-angle aluminium
- K0477
Tube clamps, base, plastic
- K0477
Tube clamps base, plastic with ball joint
- K0477
Tube clamps base aluminium
- K0477
Tube clamps base, aluminium with ball joint
- K0477
Tube clamps base, stainless steel
- K0478
Tube clamps, base, plastic
- K0478
Tube clamps base aluminium
- K0479
Tube clamps flange aluminium
- K0479
Tube clamps flange aluminium
- K0479
Tube clamps, flange, plastic
- K0480
Tube clamps, flange, plastic
- K0480
Tube clamps flange aluminium
- K0481
Tube clamps, straight, plastic
- K0483
Tube clamps, straight, plastic
- K0483
Tube clamps straight, plastic with ball joint
- K0483
Tube clamps, straight, aluminium
- K0483
Tube clamps straight, aluminium with ball joint
- K0483
Tube clamps straight, aluminium with double ball joint
- K0484
Tube clamps swivel half, sunken teeth, plastic
- K0484
Tube clamps, swivel half, aluminium, with sunken teeth
- K0485
Tube clamps swivel half, raised teeth, plastic
- K0485
Tube clamps swivel half, aluminium, with raised teeth
- K0486
Tube clamps swivel half, sunken teeth, plastic
- K0486
Tube clamps, swivel half, aluminium, with sunken teeth
- K0487
Tube clamps swivel base, sunken teeth, plastic
- K0487
Tube clamps swivel base, aluminium, with sunken teeth
- K0488
Tube clamps, swivel, plastic
- K0488
Tube clamps swivel aluminium
- K0489
Tube clamps, swivel, plastic
- K0489
Tube clamps swivel, plastic with ball joint
- K0489
Tube clamps swivel aluminium
- K0489
Tube clamps swivel, aluminium with ball joint
- K0490
Tube clamps, swivel base, plastic
- K0490
Tube clamps swivel base aluminium
- K0491
Reducer sleeves square
- K0492
Reducer sleeves round
- K0493
Round and square tubes
- K1966
Round aluminium tubes
with slots
- K1967
Rotation locks
plastic for tube clamps
- K0494
Tube end plugs, plastic
for round and square tubes
- K2028
Protective caps, plastic
for round tubes
- K2029
Protective caps, plastic
for square tubes
- K0495
Linear actuators
- K0495
Linear actuators, stainless steel
- K1510
Monitor brackets
- K1792
Monitor brackets, aluminium, height adjustable 4 or 5 axis
- K0496
Linear actuator connector clamps, cross
- K0496
Linear actuator connector clamps, stainless steel, cross
- K0497
Linear actuator connector clamps, cross
- K0498
Linear actuator connector clamps, flange
- K0498
Linear actuator connector clamps, stainless steel, flange
- K0499
Linear actuator connector clamps, base
- K0499
Linear actuator connector clamps, stainless steel, base
- K0615
Square tube connectors straight
- K0616
Square tube connectors two-way
- K0617
Square tube connectors three-way, flat
- K0618
Square tube connectors four-way, flat
- K0619
Square tube connectors three-way
- K0620
Square tube connectors four-way
- K0621
Square tube connectors five-way
- K0622
Square tube connectors six-way
- K0623
Square tube connectors three-way with tapped hole
- K0624
Square tube connectors four-way with tapped hole
- K0625
Square tube connectors two-way swivel
- K0626
Square tube connectors three-way swivel
- K0627
Square tubes
- K0628
Square tubes with web
- K1042
Straps
- K1043
Angles
- K2017
Angle steel
- K1045
Angle sets Type I
- K1046
Angle sets Type B
- K1047
Angle elements, T1 Type I
- K1048
Angle elements, T2 Type I
- K1049
Clamping angles Type I
- K1050
Joint angles Type I
- K1051
Joints Type B and Type I
- K1053
End caps Type B and Type I
- K1054
Cover and adapter profiles Type B and Type I
- K1055
Cover profile Type I
- K1056
Slide rail Type I
- K1806
Profile slider
- K1806
Profile slider
with clamping lever
- K1057
Foot plates Type B and Type I
- K2056
Bearing flange
for feed roller
- K2057
Aluminium profiles D50
Type I, tube
- K1278
Cable tie block
- K1279
Cable clips
- K1280
Cable clips with T-slot key
- K1281
Sensor holders
- K1282
Earthing terminal type I
- K1283
Potential equaliser type I
- Lean tube connector Ø30 type I
- Telescopic slides
- Hinges
- Rubber Buffers
- Latches, snap locks, slam latches
- Swivel feet, levelling feet
- Locating Components
- Leveling Elements
- Machine & Fixture Components
- Joints
- Magnets
- Level indicators, screw plugs
- Material handling
- Tools
- Product lines KIPP Inc.
|
|
|
K1792_AMonitor bracket, aluminium, height adjustable 4 or 5 axis, Form... |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Mounting plate steel/plastic.
Monitor bracket aluminium.
Bearing washers and sleeves plastic.
Mounting flange aluminium.
Mounting adapter aluminium.
Screws steel.Version:Mounting plate painted.
Monitor bracket painted.
Mounting flange painted.
Mounting adapter painted.
Screws electro zinc-plated.Note:Screens weighing up to 10 kg can be attached to the monitor brackets and removed again as required without any effort. Furthermore, the height and the viewing angle of the monitor bracket arm can be adjusted. The mounted monitor can be rotated through 90°. The mounting plates of the monitor brackets are compatible with the VESA 75/100 standard.Application:With the help of the hex key, the force that has to be applied to adjust the various axis can increased or decreased.Supplied with4 axis monitor bracket:
1x VESA mounting plate including 4x M4x12 Phillips head screws.
1x 4 axis monitor bracket including covered cable guide.
1x DIN 6912 M8x25 assembly screw.
1x mounting adapter.
2x DIN 6912 M8x16 assembly screws.
1x 3mm hex key.
1x 4mm hex key.
5 axis monitor bracket:
1x VESA mounting plate including 4x M4x12 Phillips head screws.
1x 5 axis monitor bracket including covered cable guide.
1x DIN 6912 M8x25 assembly screw.
1x mounting adapter.
2x DIN 6912 M8x16 assembly screws.
1x 3mm hex key.
1x 4mm hex key.Special features: |
| Order No. | Form | Form definition | B
| B1 | B2 | B3 | D | D1 | D2 | H | H1 | H2 | H3 | L | L1 | CAD | Acc. | Price | Order |
|---|
| K1792.4360 | A | 4 axis | 75 | 100 | 94 | 70 | 5,3 | 13,8 | 9 | 236 | 114 | 40 | 43 | 436 | 361 |  | | 452.16 $ (USD) | |
Other items in this category |
|
|
Order catalogue Interested in our new catalog?
Contact us...more... |
|
|
|
