{"product":{"productId":"agid.20921","price":601.66,"name":"PULL CLAMP PNEUMATIC D=105 MILD STEEL,BLACK OXIDIZED, CASE-HARDENED"},"currency":"USD"}
Pull clamp
pneumatic
mild steel
black oxidized
- Automatic pneumatic clamping process
- Can also be used as zero-point clamping system
- Monitoring of the workpiece position possible
- Rapid workpiece connection and disconnection
Sales unit
$601.66
as low as | plus sales tax
plus shipping and handling
Registered customers are shown the live availability of the item after logging in to the website. Please contact our customer support for assistance.
Added to your shopping cart
Designation
Pull clamp
Version 1
pneumatic
Main
material
mild steel
Main
color
black oxidized
Component
color
case-hardened
D=diameter
105
Clamping
force
kN
2,5
Clamping force
(clamping by spring force)
N
500
D1
75
D2
63
D3
12
D4
88
D5
G 1/8
H
50
H1
47
H2
35
H3
31
H4
19
H5
10
H6
1,9
Operating
pressure
MPa
0,3 - 1,0
~ CONFLICT MINERALS 3TG status
Unknown
~ CP65 substance 2 cancer
Soots, tars, and mineral oils
~ PFAS free?
Unknown
~ REACH SVHC-free?
Yes
~ RoHS conformity
Yes, without exemption
~ TSCA 6(H) conformity
Yes
Description
Material
Carbon steel.
Version
Clamping element hardened, ground and black oxidized.
Note
Pneumatic pull clamps are used to clamp workpieces and fixtures.
The clamping pin is screwed onto the workpiece or fixture.
Clamping procedure:
Open the clamping element by applying compressed air to the ”open” port.
Close clamping element (for clamping) by applying compressed air to the ”close” port.
The third port (D5) is used to blow out and clean the seating face. It can also be used to get feedback to ensure the workpiece is correctly seated, or to ease lifting the workpiece off after the opening procedure.
The system can also be used as a zero-point clamping system.
The clamping forces indicated are based on 0.5 MPa.
Permissible opposing force = 2x the clamping force of the module.
The clamping pin is screwed onto the workpiece or fixture.
Clamping procedure:
Open the clamping element by applying compressed air to the ”open” port.
Close clamping element (for clamping) by applying compressed air to the ”close” port.
The third port (D5) is used to blow out and clean the seating face. It can also be used to get feedback to ensure the workpiece is correctly seated, or to ease lifting the workpiece off after the opening procedure.
The system can also be used as a zero-point clamping system.
The clamping forces indicated are based on 0.5 MPa.
Permissible opposing force = 2x the clamping force of the module.
Accessory
K1391 Draw bolts for pneumatic pull clamps.
Important note on downloading CAD models
You must log in before you can download our CAD models. If you have not yet created an account, please contact our customer support.
Discover our product range
