{"product":{"productId":"agid.23389","price":11.65,"name":"BOWDEN CABLE WITH PLASTIC SLEEVE, WITHSCREW NIPPLE, L=500, STAINLESS STEEL,COMP:PLASTIC"},"currency":"USD"}
Bowden cable
with plastic sleeve
stainless steel
Sales unit
$11.65
as low as | plus sales tax
plus shipping and handling
Registered customers are shown the live availability of the item after logging in to the website. Please contact our customer support for assistance.
Added to your shopping cart
Designation
Bowden cable
Version 1
with plastic sleeve
Version 2
with screw nipple
Main
material
stainless steel
Component
material
plastic
L=Length
500
B
7
B1
8
D
1,5
D1
5
D2
9
D3
5
D4
4,8
L1
464,4
L2
19,5
L3
2,5
L4
2,5
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
not yet identified
~ REACh SVHC 2 name > threshold
lead possible
~ RoHS conformity
yes, exemptions not yet identified
~ TSCA 6(H) conformity
yes
Description
Material
Wire cable stainless steel.
Sheath, steel wire with inner and outer plastic coating.
body POM.
Nipple Zamac.
Screw nipple steel.
Sheath, steel wire with inner and outer plastic coating.
body POM.
Nipple Zamac.
Screw nipple steel.
Version
Bowden cable sheath and body black.
Screw nipple galvanized.
Screw nipple galvanized.
Note
Bowden cables transfer the traction force and are used in combination with a release as a remote control.
There are different lengths available to select from. The Bowden cable can be shortened as required during installation to ensure a perfect fit in the respective application.
Note the following points when installing Bowden cables:
The length of the free end of the cable can change due to layout angle, bend radius and load factors.
When laying the cable, take particular care to ensure that the bend radius is not below the minimum value, which in this case is R = 65 mm. A too small radius can lead to increased wear and higher friction. During installation, avoid bending the cable more than the minimum value as this can cause damage to the casing. Also, the casing is designed only to support pressure forces. If pulled too sharply, the inner coil will be stretched and permanently damaged.
Tensile strength 1000 N max.
There are different lengths available to select from. The Bowden cable can be shortened as required during installation to ensure a perfect fit in the respective application.
Note the following points when installing Bowden cables:
The length of the free end of the cable can change due to layout angle, bend radius and load factors.
When laying the cable, take particular care to ensure that the bend radius is not below the minimum value, which in this case is R = 65 mm. A too small radius can lead to increased wear and higher friction. During installation, avoid bending the cable more than the minimum value as this can cause damage to the casing. Also, the casing is designed only to support pressure forces. If pulled too sharply, the inner coil will be stretched and permanently damaged.
Tensile strength 1000 N max.
Scope of delivery
Wire cable with nipple, sheath, body and screw nipple.
Drawing reference
1) body
2) Screw nipple
3) Body 1x19
4) Nipple
5) Sheath
6) Wire cable
2) Screw nipple
3) Body 1x19
4) Nipple
5) Sheath
6) Wire cable
Accessory
Release K1481 or snap locks K1851.
Important note on downloading CAD models
You must log in before you can download our CAD models. If you have not yet created an account, please contact our customer support.
Discover our product range
