Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted.

Threaded sleeve and grip 1.4308.

Indexing pin 1.4305.

Spring 1.4310.

Grip cap thermoplastic PA.

Threaded sleeve, spring and grip bright.
Indexing pin ground and bright.
Grip cap in various colors:
- black gray RAL 7021.
- pure orange RAL 2004.
- colza yellow RAL 1021.
- traffic red RAL 3020.
- signal green RAL 6032.
- traffic blue RAL 5017.
- light gray RAL 7035.

The closed construction of these indexing plungers with internal guide permits them to be installed in places subject to heavy soiling e.g. dust and airborn sparks.

- The indexing pin is retracted by rotating the grip through 180°.
- The closed design prevents dirt from entering the threaded sleeve.
- The hexagon on the sleeve facilitates easy installation of the indexing plunger.

Special versions.

Style A: without grip cap or locknut
Style B: without grip cap, with locknut
Style C: with grip cap, without locknut
Style D: with grip cap and locknut

Mounting bracket K0638.
Positioning bushes K1290.