{"product":{"productId":"agid.31884","price":580.71,"name":"THREADES LIFTING PIN, M. DREHB.SCHÄKEL, D1=M08, F1=2,1, STEELMANG-PHOSPHATED"},"currency":"USD"}
Threaded lifting pin
with revolving shackle
steel
manganese-phosphated
- Quick and simple hoist element with swiveling and rotating shackle
- The balls can be released by a push button
- The balls are locked again by releasing the push button
- Corrosion protected
- TÜV tested
Sales unit
$580.71
as low as | plus sales tax
plus shipping and handling
Added to your shopping cart
Designation
Threaded lifting pin
Version 1
with revolving shackle
Main
material
steel
Surface finish
body
manganese-phosphated
D1=Thread
M8
L1=shaft length
12
D2
6,62
D4
33,5
D5
38
D6
20
F1
kN
2,1
F2
kN
0,9
F3
kN
0,8
L10
8
L2
17,8
L3
25,7
L4
54,9
L5
42,5
L6
46
L7
68
L8
123,7
L9
38
Tightening
torque
max. Nm
2
~ Battery relevance?
No
~ CE relevance?
Yes
~ CP65 info warning required?
Yes
~ CP65 substance 1 CAS No.
no CAS-No.
~ CP65 substance 1 cancer&reprod.
Lead and lead compounds
~ CP65 substance 2 CAS No.
no CAS-No.
~ CP65 substance 2 cancer
Soots, tars, and mineral oils
~ Conflict Minerals 3TG status
no intentional 3TG
~ Conflict Minerals content
Sn
~ Dual-Use No.
Not listed
~ Magnet relevance?
No
~ PFAS free?
Yes
~ REACH SVHC 1 CAS No.
7439-92-1
~ REACH SVHC 1 name > threshold
Lead
~ REACH info SVHC-free?
No
~ REACH version
04.02.2026 - 253 substances
~ RoHS conformity
Yes, with exemption
~ RoHS exemption/s
III/6b-II
~ RoHS version
2011/65/EU incl.2015/863/EU
~ Safety Data Sheet relevance?
No
~ TSCA 6(H) conformity
Yes
~ TSCA version
10/2021
~ WEEE
N
Description
Material
Pin carbon steel, tempered.
Shackle carbon steel, tempered.
Threaded element stainless steel 1.4542.
Push button aluminum.
Spring stainless steel.
Version
Pin manganese phosphated.
Shackle manganese phosphated.
Threaded element precipitation hardened.
Push button orange anodized.
Shackle manganese phosphated.
Threaded element precipitation hardened.
Push button orange anodized.
Note
Threaded hoist pins are used as a quick and simple lifting element with a swiveling and rotating shackle.
The threaded segment is unlocked by pressing the push button, and the threaded pin can then be inserted into or removed from the tapped hole. When the push button is released, the threaded segment locks securely. This eliminates time-consuming screwing in and unscrewing as by e.g. ring bolts.
The swiveling and rotating shackle always aligns itself in the direction of pull when lifting, without the pin rotating. The safety strap on the shackle prevents the push-button being unintentionally pressed during linear tension.
The prerequisite for use is a precision tapped hole in a material with the appropriate strength.
Detailed operating instructions are enclosed with each threaded hoist pin.
Corrosion protected.
TÜV certified.
The specifications X min., F1, F2 and F3 are tested as per DIN EN 13155 with a test load equal to 3 times the nominal load.
The threaded segment is unlocked by pressing the push button, and the threaded pin can then be inserted into or removed from the tapped hole. When the push button is released, the threaded segment locks securely. This eliminates time-consuming screwing in and unscrewing as by e.g. ring bolts.
The swiveling and rotating shackle always aligns itself in the direction of pull when lifting, without the pin rotating. The safety strap on the shackle prevents the push-button being unintentionally pressed during linear tension.
The prerequisite for use is a precision tapped hole in a material with the appropriate strength.
Detailed operating instructions are enclosed with each threaded hoist pin.
Corrosion protected.
TÜV certified.
The specifications X min., F1, F2 and F3 are tested as per DIN EN 13155 with a test load equal to 3 times the nominal load.
Temperature range
max. +250 °C.
Thread size M24: From 150 °C linear decrease in load capacity by 23%.
Thread size M24: From 150 °C linear decrease in load capacity by 23%.
Assembly
Installing:
1. Press the button and keep it pressed.
2. Insert the threaded hoist pin.
3. Release the button (the button should pop back out again).
4. Screw the threaded hoist pin in by hand
until it lays completely on the contact face.
5. It should be ensured that the
threaded segment is engaged in the
receiving thread.
Removing:
1. Rotate the threaded hoist pin
ca. a quarter turn anti-clockwise
2. Press the button and keep it pressed.
3. Remove the threaded hoist pin.
4. Release the button.
1. Press the button and keep it pressed.
2. Insert the threaded hoist pin.
3. Release the button (the button should pop back out again).
4. Screw the threaded hoist pin in by hand
until it lays completely on the contact face.
5. It should be ensured that the
threaded segment is engaged in the
receiving thread.
Removing:
1. Rotate the threaded hoist pin
ca. a quarter turn anti-clockwise
2. Press the button and keep it pressed.
3. Remove the threaded hoist pin.
4. Release the button.
Important note on downloading CAD models
You must log in before you can download our CAD models. If you have not yet created an account, please contact our customer support.
Discover our product range
