{"product":{"productId":"agid.1396","price":11.49,"name":"INDEXING PLUNGER WITHOUT COLLAR SIZE:2D1=M12X1,5, D=6, FORM:K, WITH THREADEDPIN WITH LOCKNUT, STEEL HARDENED"},"currency":"USD"}
Indexing Plunger
without locking slot
steel
hardened
- Indexing plungers facilitate indexing and locking
- Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
- High stability
- Threaded pins enable the indexing plunger to be operated
- Material: steel or stainless steel
Sales unit
$11.49 / pcs.
as low as | plus sales tax
plus shipping and handling
Added to your shopping cart
D1=Thread
M12x1,5
D=pin diameter
6
L=Length
42
D2
M6
Fx30°
1,8
Grade
5.8
Item
Indexing Plunger
L1
28
L2
8
Locknut
with locknut
Main
material
steel
Product type
without collar
RoHS
true
SW
19
Size
2
Spring force
final pressure
F2 approx. N
14
Spring force
initial pressure
F1 approx. N
6
Surface finish
body
hardened
Travel
S
6
Version 1
without locking slot
Version 2
with threaded pin
style
K
Description
Material
Steel version
Indexing pin hardened:
grade 5.8.
Stainless steel version
Indexing pin hardened:
Threaded body 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded body 1.4305.
Indexing pin 1.4305.
Version
Steel version:
Indexing pin hardened, ground, black oxidized.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.
Indexing pin hardened, ground, black oxidized.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.
Note
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged.
Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables.
A washer is available to aid screwing in the indexing plungers. The washer is placed on the threaded body so that the carrier pins engage in the slot.
Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables.
A washer is available to aid screwing in the indexing plungers. The washer is placed on the threaded body so that the carrier pins engage in the slot.
On request
Special versions.
Accessory
Spacer rings K0665.
Fastening sets for thin-walled parts K2146.
Fastening sets for thin-walled parts K2146.
Important note on downloading CAD models
You must log in before you can download our CAD models. If you have not yet created an account, please register under "My account" (right-hand side of the screen) and follow the instructions.