Products

Catalog / Service

Download
- KIPP Catalog
  
  Brochures
  
  CAD data
  
  Certificates
  
  Thread Pitch Chart
Ordering / Distributors
- Form RFQ
  
  Distributors regional/national

Home
Company

Product groups

Catalog / Service

Callback

Polyamide	go back
Catalog / Service Material overview Thermoplast Polyamide

Polyamide (PA 6)
Polyamide with 30% glass fibres (PA 6 GF 30)
Polyamide with 30% glass beads (PA 6 GB 30)

Short designation	PA 6	PA 6 GF 30	PA 6 GB 30
Description	Polyamide (polymerizate)	Polyamide with 30% glass fibres	Polyamide with 30% glass beads
Mechanical properties
Test specimen condition	Dry/damp	Dry/damp	Dry/damp
Tensile strength [MPa]	No info	175/110	80/55
Elastic modulus (tensile) [MPa]	3000/1000	9000/6000	5700/3400
Ball indentation hardness [MPa]	150/70	220/150	180/105
Physical properties
Density [g/cm³]	1.14	1.36	1.36
Melting point [°C]	220	220	220
Application temperatures
Max. temp., short-term [°C]	180	200	200
Max. temp., continuous [°C]	90	130	90
Min. application temp. [°C]	-40	-40	-40
Other properties
Flammability according to UL 94	HB	HB	HB
Water absorption (normal climate) [%]	3	2.1	2.1
Chemical resistance
Mineral grease and oils	+	+	+
Petrol	+	+	+
Weak/strong acids	o/-	o/-	o/-
Weak/strong alkalis	+/o	o/-	+/o
Perchloroethylene	+	+	+
Trichloroethylene	+	+	+
Acetone	+	+	+
Alcohols	+	+	+
Hydrolysis resistance (hot water)	o	o	o
Weather/UV radiation	o	o	o

+ resistant / o limited resistance / - not resistant

This information is for reference only; we do not assume any liability for its accuracy. The properties of thermoplastics are highly dependent on their specific composition and their additives.

Back to overview