KIPP uses cookies to optimally design and continually improve the website.
By continuing to use this website, you agree to the use of cookies.

okay
Product groups
Wedge clamps jaw faces serrated
K0040

Wedge clamps jaw faces serrated

go back

Item description/product images

DescriptionMaterial:Body and clamping segments tool steel.Version:Body hardened.
Jaw segments hardened (49-51 HRC) black oxidized.
Wedge faces ground.
Note:

The compact design makes these wedge clamps ideal for horizontal and vertical series clamping. The hardened and ground wedge faces can exert high clamping forces. 
These wedge clamps can be mounted in grid holes or T-slots. Tightening the DIN 912 socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.

The jaws of version K0040.08 and K0040.0810 are not serrated.

The wedge has a slightly elongated hole allowing for movement.

Spread width:
K0040.08 = ±0.5 mm
K0040.12 = ±1.0 mm
K0040.16 = ±1.5 mm.

Drawing reference:
1) Wedge clamps
2) Workpiece
3) Fixed stop
RoHS
DownloadHere is all the information as a PDF datasheet:
 Datasheet K0040 Wedge clamps jaw faces serrated 276 kB

Drawings

Wedge clamps jaw faces serrated

Item selection/filter

Item No.A
min.
A
max.
BCDEF
Socket head screw
DIN 912
GClamping
force
kN
Tightening
torque
Nm
CADAcc.PriceOrder
K0040.0827312915212,5M8x25for tapped hole1525on request
K0040.081027312915212,5M8x25for T-slot 101525on request
K0040.1242494122304M12x40for tapped hole3085on request
K0040.121442494122304M12x30for T-slot 143085on request
K0040.1657665629425M16x60for tapped hole50210on request
K0040.161857665629425M16x50for T-slot 1850210on request
Search
My CADACCOUNTE-mailPassword
Availability
United States
Sitemap Print Newsletter Top
Copyright © 2018 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · information@kipp.com · General Terms and Conditions