KIPP uses cookies to optimally design and continually improve the website.
By continuing to use this website, you agree to the use of cookies.

Product groups
Oil level gauge with electric oil level and temperature monitoring, long version

Oil level gauge with electric oil level and temperature...

go back

Item description/product images

DescriptionMaterial:Housing aluminum.
Tube polycarbonate.
Caps polyamide.
O-ring and flat seal NBR.
Reflector PVC.
Float plastic.
Screws and nuts, steel.
Version:Sight glass crystal clear.
Reflector white.
Float red, with magnetic element.
Screws and nuts electro zinc-plated.
Note:The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C.
As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal.
The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the center of the lower fastening screw.
The reed switch is equipped with a normally open (NO) contact as standard.
The temperature is monitored by a temperature switch (bi-metal). When the specified temperature is reached, the sensor closes (NO) or opens (NC) the circuit depending on the model.
The maximum pressure is 1 bar. The maximum tightening torque of the fastening screws is 5 Nm.
The sight glass has high mechanical strength and is resistant to mineral oil, petrol, lubricants, petroleum, solvents and most chemical substances. Avoid contact with alcoholic solutions and hot water.
Assembly:The oil level gauge is secured using two M12 tapped holes or, two 12.2 mm (± 0.2 mm) holes and flange nuts. center distance for the fastening holes = L1 ±0.5.Function:The oil level is measured using a float element with a magnet that activates the electrical contact when the REED level switch is reached. If the oil level falls below a particular level, an electrical pulse can be emitted.Note:Strong magnetic fields can impair function.Drawing reference:
1) Sight glass
2) O-ring
3) M12 flange nut
4) Plastic end cap
5) Flat seal
6) M12 hollow screw
7) Float with magnet
8) Reed switch
9) Temperature sensor
10) aluminum housing
Special features:
DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.
 Datasheet K1430 Oil level gauge with electric oil level and temperature monitoring, long version 213 kB
 Technical information for oil level gauges 77,4 kB


Oil level gauge with electric oil level and temperature monitoring, long version

Item selection/filter

Order No.Version 2BB1D1

HH1H2LL1L2SWNumber of
fastening screws
K1430.1300normally open contact3039M123016,580326,6300358,3172 353.39 $ (USD)
K1430.2300normally closed contact3039M123016,580326,6300358,3172 353.39 $ (USD)
K1430.1400normally open contact3039M123016,580426,6400458,3172 359.94 $ (USD)
K1430.2400normally closed contact3039M123016,580426,6400458,3172 359.94 $ (USD)
K1430.1500normally open contact3039M123016,580526,6500558,3172 366.45 $ (USD)
K1430.2500normally closed contact3039M123016,580526,6500558,3172 366.45 $ (USD)
My CADACCOUNTE-mailPassword
Shop basket
Number of items: 0
Amount: 0.00 $ (USD)
Speed ordering
United States
Sitemap Print Newsletter Top
Copyright © 2024 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · · General Terms and Conditions