- Product Lines
- Adjustable Handles
- Indexing Plungers
- Spring Plungers
- Ball Lock Pins
- Toggle Clamps
- Clamping devices
- Knobs
- Handwheels
- Quarter-turn locks, compression latches
- Pull Handles
- Tube Connectors
- Telescopic slides
- Hinges
- K0434
Hinges
plastic, lift-off, left
- K0434
Hinges
plastic, lift-off, right
- K0437
Hinges
plastic, with elongated holes
- K0438
Hinges
plastic, lift-off, with guide tabs
- K0435
Hinges
plastic
- K0439
Hinges
plastic, detent
- K0440
Hinges
plastic, with adjustable friction
- K1195
Hinges
aluminum, with adjustable friction
- K1196
Hinges
aluminum, with adjustable friction
- K1518
Hinges, stainless steel
with preset friction
- K1197
Hinges
aluminum, with detent
- K1198
Hinges
aluminum, with detent
- K1004
Plastic hinges with fastening holes
- K1005
Hinges, plastic, with bushing
- K1006
Hinges, plastic, with fastening screws
- K0441
Hinges
die-cast zinc, with elongated holes
- K0436
Hinges plastic, with locking lever
- K0442
Hinges die-cast zinc, with locking lever
- K0579
Hinges
aluminum, lift-off, left
- K0579
Hinges
aluminum, lift-off, right
- K0580
Hinges
aluminum
- K1084
Hinges
stainless steel
- K1343
Hinges
stainless steel
- K1085
Hinges
stainless steel
- K1341
Hinges
stainless steel
- K1346
Single leaf hinges
adjustable, stainless steel
- K1348
Hinges
stainless steel
- K1345
Hinges lift-off
stainless steel
- K1342
Hinges lift-off
stainless steel
- K1347
Strap hinges stainless steel
with grease nipple
- K1141 Metric
Hinges steel
maintenance-free
- K1082
Hinges
sheet steel or sheet stainless steel
- K1349
Butt hinges
stainless steel
- K1517
Hinges, stainless steel
- K1447
Hinges steel or stainless steel
internal, opening angle 90°
- K1448
Hinges steel or stainless steel
internal, opening angle 125°
- K1449
Hinges steel or stainless steel
internal, opening angle 110°
- K1519
Hinges, steel
in-frame opening angle 110°
- K1140 Metric
Hinges
weldable
- K1173
Spring hinges
steel, stainless steel or aluminium, 50 mm
- K1142
Block hinges with fastening nuts
- K1143
Block hinges with fastening nuts, long version
- K1338
Block hinges
with fastening nuts
- K1144
Block hinges with counterbore, long version
- K1304
In-line hinges stainless steel
lift-off, screw-on
- K1174
Spring hinges
steel or stainless steel, 75 mm
- K1175
Spring hinges
steel, stainless steel or aluminium, 120 mm
- K1176
Spring hinges
steel or stainless steel, 180 mm
- K1177
Spring hinges
steel or stainless steel, 240 mm
- K1178
Spring hinges
aluminum profile, 0.2 Nm
- K1179
Spring hinges
aluminum profile, 0.35 Nm
- K1665
Spring hinges
aluminum profile, 0.50 Nm
- K1180
Spring hinges
aluminum profile, 0.7 Nm
- K1666
Spring hinges
aluminum profile, 0.7 Nm, long version
- K1667
Spring hinges
aluminum profile, 0.9 Nm, long version
- K1181
Spring hinges
aluminum profile, 1.3 Nm
- K1182
Spring hinges
aluminum profile, 3.8 Nm
- K0985
Hinges
weldable, stainless steel
- K1337
Hinges
weldable, stainless steel
- K0984
Hinges weldable
- K1499
Security hinge switches
- K1501
Security hinge switches
long version
- K1498
Connectors
with screw fitting
- Rubber Buffers
- Latches, snap locks, slam latches
- Swivel feet, levelling feet
- Locating Components
- Leveling Elements
- Machine & Fixture Components
- Joints
- Magnets
- Level indicators, screw plugs
- Material handling
- Tools
- Product lines KIPP Inc.
|
|
|
K0439Hinges plastic, detent |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Hinge and caps fiberglass reinforced PA thermoplastic.
Hinge pin stainless steel.Version:Hinge and caps black.
Pin bright.Note:These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminum profile slots.
The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for instyleation purposes only and do not constitute a legally binding assurance of properties.
The load values have been determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application.
Different materials onto which the hinges are installed and the type of mounting, weather conditions and wear can influence the determined values.
Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Item No.
| A | A1 | A2 | A3 | A4 | B | Guide tabs
for slot | F1 max.
kN | F2 max.
kN
| CAD | Acc. | Price | Order |
|---|
| K0439.56181800 | 54 | 17,75 | 17,75 | 27 | 27 | 56 | - | 0,4 | 0,35 |  | | 23.35 $ (USD) | | | K0439.56181806 | 54 | 17,75 | 17,75 | 27 | 27 | 56 | 6 | 0,4 | 0,35 | | | 23.35 $ (USD) | | | K0439.56181808 | 54 | 17,75 | 17,75 | 27 | 27 | 56 | 8 | 0,4 | 0,35 | | | 23.35 $ (USD) | | | K0439.56232300 | 73,5 | 22,75 | 22,75 | 36,75 | 36,75 | 56 | - | 0,6 | 0,425 | | | 25.57 $ (USD) | | | K0439.56232308 | 73,5 | 22,75 | 22,75 | 36,75 | 36,75 | 56 | 8 | 0,6 | 0,425 | | | 25.57 $ (USD) | | | K0439.56232310 | 73,5 | 22,75 | 22,75 | 36,75 | 36,75 | 56 | 10 | 0,6 | 0,425 | | | 25.57 $ (USD) | |
Other items in this category |
|
|
|
Order catalog Interested in our new catalog?
Contact us...more... |
|
|
|
