Indexing Plungers without collar, Style K, inch

go back

Products
- Indexing Plungers
  - Indexing Plungers without knob
    - Indexing Plungers without collar
      - Indexing Plungers without collar, Style K, inch

Item description/product images

DescriptionMaterial:Steel version
Indexing pin hardened:
quality class 5.8.

Stainless steel version
Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent). Version:Steel version:
Indexing pin hardened, ground and with black oxide finish.

Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:For the inch series, dimensions D1 and SW are in inches, all other dimensions are in mm.
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged.
Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables.
Instead of a wrench, a knurled installation tool is used to screw in these plungers. The carrier pins on the tool engage the slot in the plunger body.On request:Special versions.

DownloadHere is all the information as a PDF datasheet:

Datasheet K0345_K Inch Indexing Plungers without collar, Style K, inch

161 kB

Drawings

Overview of items (compressed)

Item selection/filter

Item No. steel hardened	Item No. stainless steel hardened	Item No. stainless steel not hardened	Style	D	D1	D2	L	L1	L2	H	SW	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Item No. installation tool
K0345.2903AJ	K0345.02903AJ	K0345.12903AJ	K	3	1/4-28	M2	24	17	3,5	3,5	7/16	0,8	4,5	10	K0344.99
K0345.2004AK	K0345.02004AK	K0345.12004AK	K	4	5/16-24	M3	32	21	7	4	1/2	1	6	12	K0344.90
K0345.2105AL	K0345.02105AL	K0345.12105AL	K	5	3/8-24	M4	37	24	8	5	9/16	1,3	5	12	K0344.91
K0345.2206A5	K0345.02206A5	K0345.12206A5	K	6	1/2-13	M6	42	28	8	6	3/4	1,8	6	14	K0344.92
K0345.2308A6	K0345.02308A6	K0345.12308A6	K	8	5/8-11	M8	56	36	12	8	15/16	2,3	15	35	K0344.93
K0345.2410A7	K0345.02410A7	K0345.12410A7	K	10	3/4-10	M8	62	40	12	10	1-1/8	2,8	15	34	K0344.94
K0345.2412AO	K0345.02412AO	K0345.12412AO	K	12	3/4-16	M8	66	42	12	12	1-1/8	2,8	15	39	K0344.94
K0345.2516A8	K0345.02516A8	K0345.12516A8	K	16	1-8	M10	80	50	14	16	1-1/2	3,2	20	46	K0344.95