Indexing Plungers pull knob, Style C, metric

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers pull knob
      - Indexing Plungers pull knob, Style C, metric

Item description/product images

DescriptionMaterial:Steel version
Indexing pin hardened:
quality class 5.8.

Stainless steel version
Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob black-grey thermoplastic.Version:Steel version:
Indexing pin hardened, ground and with black oxide finish.

Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:For the inch series, dimensions D1 and SW2 are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request:Special versions and spacer rings K0665.

DownloadHere is all the information as a PDF datasheet:

Datasheet K0339_C Metric Indexing Plungers pull knob, Style C, metric

153 kB

Drawings

Overview of items (compressed)

Item selection/filter

Item No. steel hardened	Item No. stainless steel hardened	Item No. stainless steel not hardened	Style	D	D1	D2	L	L1	L2	L3	H	SW1	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
K0339.3105	K0339.03105	K0339.13105	C	5	M10x1	21	47	17	7	15	5	13	1,3	5	12
K0339.3206	K0339.03206	K0339.13206	C	6	M12x1,5	25	56	20	8	17	6	14	1,8	6	14
K0339.3308	K0339.03308	K0339.13308	C	8	M16x1,5	33	74	26	10	23	8	19	2,3	15	35
K0339.3410	K0339.03410	K0339.13410	C	10	M20x1,5	33	80	28	12	25	10	22	2,8	15	34