KIPP uses cookies to optimally design and continually improve the website.
By continuing to use this website, you agree to the use of cookies.

Product groups
Indexing Plungers pull knob all stainless steel, Style B, metric
K0632_B Metric

Indexing Plungers pull knob all stainless steel, Style B, metric

go back

Item description/product images

DescriptionMaterial:Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob 1.4305 (AISI 303 equivalent), electropolished.
Indexing pin ground.
Note:For the inch series, dimensions D1 and SW2 are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request:Special versions.


Indexing Plungers pull knob all stainless steel, Style B, metric

Item selection/filter

Item No.StyleMain
locating pinDD1D2LL1L2L3HSW1SW2Fx30°Spring force
initial pressure
F1 approx. N
Spring force
final pressure
F2 approx. N
K0632.002903Bstainless steelhardened3M6x0,751434,5125103,58100,84,510 on request
K0632.002004Bstainless steelhardened4M8x1184315613410131612  on request
K0632.002105Bstainless steelhardened5M10x1215017715513171,3512  on request
K0632.002206Bstainless steelhardened6M12x1,5255920817614191,8614  on request
K0632.002308Bstainless steelhardened8M16x1,53377261023819242,31535  on request
K0632.002410Bstainless steelhardened10M20x1,533832812251022302,81534 on request
K0632.002412Bstainless steelhardened12M20x1,533872814251222302,81539 on request
K0632.002516Bstainless steelhardened16M24x2401063218281627363,22046 on request
K0632.112903Bstainless steelnot hardened3M6x0,751434,5125103,58100,84,510 on request
K0632.112004Bstainless steelnot hardened4M8x1184315613410131612  on request
K0632.112105Bstainless steelnot hardened5M10x1215017715513171,3512  on request
K0632.112206Bstainless steelnot hardened6M12x1,5255920817614191,8614  on request
K0632.112308Bstainless steelnot hardened8M16x1,53377261023819242,31535  on request
K0632.112410Bstainless steelnot hardened10M20x1,533832812251022302,81534 on request
K0632.112412Bstainless steelnot hardened12M20x1,533872814251222302,81539 on request
K0632.112516Bstainless steelnot hardened16M24x2401063218281627363,22046 on request
My CADACCOUNTE-mailPassword
Shop basket
Number of items: 0
Amount: 0.00 $
Speed ordering
United States
Sitemap Print Newsletter Top
Copyright © 2020 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · · General Terms and Conditions