KIPP uses cookies to optimally design and continually improve the website.
By continuing to use this website, you agree to the use of cookies.

Product groups
Indexing Plungers pull knob all stainless steel, Style C, metric
K0632_C Metric

Indexing Plungers pull knob all stainless steel, Style C, metric

go back

Item description/product images

DescriptionMaterial:Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob 1.4305 (AISI 303 equivalent), electropolished.
Indexing pin ground.
Note:For the inch series, dimensions D1 and SW2 are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request:Special versions.


Indexing Plungers pull knob all stainless steel, Style C, metric

Item selection/filter

Item No.StyleMain
locating pinDD1D2L1L2L3L4HSW1Fx30°Spring force
initial pressure
F1 approx. N
Spring force
final pressure
F2 approx. N
K0632.003903Cstainless steelhardened3M6x0,75141251031,53,580,84,510 on request
K0632.003004Cstainless steelhardened4M8x1181561338,54101612  on request
K0632.003105Cstainless steelhardened5M10x1211771543,55131,3512  on request
K0632.003206Cstainless steelhardened6M12x1,5252081751,76141,8614  on request
K0632.003308Cstainless steelhardened8M16x1,533261023688192,31535  on request
K0632.003410Cstainless steelhardened10M20x1,5332812257410222,81534 on request
K0632.003412Cstainless steelhardened12M20x1,5332814257812222,81539 on request
K0632.003516Cstainless steelhardened16M24x2403218289616273,22046 on request
K0632.113903Cstainless steelnot hardened3M6x0,75141251031,53,580,84,510 on request
K0632.113004Cstainless steelnot hardened4M8x1181561338,54101612  on request
K0632.113105Cstainless steelnot hardened5M10x1211771543,55131,3512  on request
K0632.113206Cstainless steelnot hardened6M12x1,5252081751,76141,8614  on request
K0632.113308Cstainless steelnot hardened8M16x1,533261023688192,31535  on request
K0632.113410Cstainless steelnot hardened10M20x1,5332812257410222,81534 on request
K0632.113412Cstainless steelnot hardened12M20x1,5332814257812222,81539 on request
K0632.113516Cstainless steelnot hardened16M24x2403218289616273,22046 on request
My CADACCOUNTE-mailPassword
Shop basket
Number of items: 0
Amount: 0.00 $
Speed ordering
United States
Sitemap Print Newsletter Top
Copyright © 2020 KIPP Inc. · All rights reserved.

Phone (269) 932 - 1100 · · General Terms and Conditions