Indexing Plungers without collar with extended locking pin,...

go back

Products
- Indexing Plungers
  - Indexing Plungers
    - Indexing Plungers without collar with extended locking pin
      - Indexing Plungers without collar with extended locking pin, Style H, inch

Item description/product images

DescriptionMaterial:Steel version
Indexing pin hardened:
quality class 5.8.

Stainless steel version
Indexing pin hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4034 (AISI 420 equivalent).

Indexing pin not hardened:
Threaded sleeve 1.4305 (AISI 303 equivalent).
Indexing pin 1.4305 (AISI 303 equivalent).

Mushroom knob black-grey thermoplastic.Version:Steel version:
Indexing pin hardened, ground and with black oxide finish.

Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:For the inch series, dimensions D1 and SW are in inches, all other dimensions are in mm.
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Instead of a wrench, a knurled installation tool is used to screw in these plungers. It slides beneath the mushroom knob so the carrier pins engage the slot in the plunger body.On request:Special versions.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0633_H Inch Indexing Plungers without collar with extended locking pin, Style H, inch

166 kB

Drawings

Overview of items (compressed)

Item selection/filter

Item No. steel hardened	Item No. stainless steel hardened	Item No. stainless steel not hardened	Style	D	D1	D2	L	L1	L2	Stroke S	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Item No. installation tool
K0633.22903AJ	K0633.202903AJ	K0633.212903AJ	H	3	1/4-28	14	33	17	11	5	0,8	4,5	12	K0344.99
K0633.22004AK	K0633.202004AK	K0633.212004AK	H	4	5/16-24	18	40,5	21	13,5	6	1	6	15	K0344.90
K0633.22105AL	K0633.202105AL	K0633.212105AL	H	5	3/8-24	21	46,5	24	14,5	8	1,3	5	16	K0344.91
K0633.22206A5	K0633.202206A5	K0633.212206A5	H	6	1/2-13	25	54,7	28	17,7	9	1,8	6	18	K0344.92
K0633.22308A6	K0633.202308A6	K0633.212308A6	H	8	5/8-11	33	72	36	24	12	2,3	15	45	K0344.93
K0633.22410A7	K0633.202410A7	K0633.212410A7	H	10	3/4-10	33	79	40	24	15	2,8	15	43	K0344.94
K0633.22412AO	K0633.202412AO	K0633.212412AO	H	12	3/4-16	33	84	42	24	18	2,8	15	51	K0344.94
K0633.22516A8	K0633.202516A8	K0633.212516A8	H	16	1-8	40	104	50	30	24	3,2	20	60	K0344.95