Indexing plungers short version, with thread lock, Style AP
Item description/product images
DescriptionMaterial:Steel version:
Indexing pin hardened:
Threaded body and indexing pin steel.
Stainless steel version:
Indexing pin not hardened:
Threaded body and indexing pin 1.4305 (AISI 303 equivalent).
Mushroom knob black gray thermoplastic.
Thread lock blue polyamide.Version:Steel version: Indexing pin hardened, ground, black oxidized.
Stainless steel version: Indexing pin not hardened, ground, bright.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. style CP is recommended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back. The thread lock enables the plunger to be screwed in to the exact depth required, no spacer ring is required. The thread lock is a gripping polyamide coating that is applied punctiform (spot).On request:Special versions.Accessory:Spacer rings K0665
DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.