Body: die-cast zinc.
Slide elements: plastic POM.
Attachment parts: electro zinc-plated steel.
O-ring: EPDM.
Adjustable handle: fiberglass reinforced plastic.
Adjustable handle mechanics: steel

Metal profile slider with clipped-on plastic slide element. With an additional adjustable handle for clamping the carriage system. Profile sliders enable low-wear linear movement of type I aluminum profiles with 8 mm slots. The absence of lubrication makes the system extremely insensitive to dirt.

The maximum permissible load for a profile slider is Fmax. = 50 N. The retaining force at a maximum tightening torque of 15 Nm is 600 N.

Slide guides with several slide carriages must be designed as a combination of fixed bearing (style F) and floating bearing (style L). This compensates for style tolerances and ensures light movement.

Style S: A set for connecting any add-on elements.

Style L: A set to use as a floating bearing.

Style F: A set to use as a fixed bearing.

The M6x55 adjustable handle is designed for assembling two 40 mm aluminum profiles.

If smaller profiles are used, the adjustable handle thread must be shortened accordingly.

Example:
40 mm square profile + 20 mm square profile: Shorten the thread to 35 mm.
40 mm square profile + 10 mm panel element: Shorten the thread to 25 mm.

The adjustable handles are also available separately under the number K0269.

Style S: Profile slider with slide elements.
2x DIN 439 B M6 hex nuts.
2x M5 slot keys for 8mm slots


Style L: Profile slider with slide elements.
2x ISO 7380 M5x25 panhead screws.
2x DIN 3771 5x1.5 O-rings.
2x M5 slot keys for 8mm slots

Style F: Profile slider with slide elements.
2x ISO 7380 M6x25 panhead screws.
2x DIN 3771 5x1.5 O-rings.
2x M5 slot keys for 8mm slots.